714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Double clamp boring bar for holding a triangular negative insert with an inscribed circle diameter of 3/8'', 3/16'' thick (ANSI designation TN.. 33. ), right hand 90° end cutting with off-set shank, steel with coolant hole, 1.1/4'' diameter x 12'' long for internal chamfering, taper boring and longitudinal boring without shoulder.
Product Specifications
| EDP Number | 6788497 |
| Functional Width (Inch) | 0.765" |
| Coolant Supply Property | 1 |
| Orthogonal Rake Angle | -6 |
| Inclination Angle | -11 |
| Maximum Axial Groove Outside Diameter (mm) | |
| Connection Diameter (mm) | 31.8 mm |
| Connection Diameter (Inch) | 1.25" |
| Shank Height (Inch) | 1.181" |
| Minimum Bore Diameter (Inch) | 1.468" |
| Functional Length (Inch) | 12" |
| Head Length (Inch) | 1.417" |
| Clamping Type Code | System D |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Ships:
From Partner Facility
Brand:
Pramet
Rake Angle:
-6
Shank Height (Inch):
1-3/16"
Shank Height (Decimal Inch):
1.1810"
Shank Height (mm):
30mm
interval quantity:
1
