714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Roemheld Pivoting Clamping Arms
7250 psi maxComplete assembly with a rugged nodular iron clamping arm that pivots on a forged steel carrier. This swing-clamp arm requires a rear support and allows operating pressures up to 7250 psi. Clamping end is held up by spring force. Adjustable contact bolt furnished. Longest reach of any standard arm.
Mounting
To mount on a Swing Clamp, first remove the carrier from the clamping arm. Mount carrier on the tapered piston rod at desired orientation, then fasten with the piston-rod nut included with swing clamp. Reassemble arm on the carrier.
Material
| Item | Material | Heat Treat | Finish | DFARS | RoHS |
| Arm | Nodular Iron | - | - | Yes | Yes |
| Carrier | Forged 1045 Steel | - | - | Yes | Yes |
| Pivot pin, retaining ring, and springs | Steel | - | - | Yes | Yes |
| Contact Bolt | Steel, Grade 8 | - | Black Oxide | Yes | Yes |
Parts Specification
| Clamp Size | A (Inch) | B (Inch) | C (Inch) | D (Inch) | E (Inch) | F (Inch) | G Thread (Inch) | H Max (Inch) | J (Inch) | K (Inch) | Weight (lbs) |
| 2 & 3 Series | 4.80 " | 1.18 " | 1.24 " | 1.73 " | 2.36 " | 1.77 " | 3/8-16 " | 2.52 " | 2.09 " | 0.57 " | 1.3 lbs. |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
