null

SGS 39894 | 0.625" Diameter x 0.625" Shank x 1.250" LOC x 3.500" OAL x 0.030" Radius 4 Flute MN (MEGACOAT NANO) Coated Corner Radius End Mill

$209.35
Brand:
SGS
Cutting Diameter (Inch):
5/8"
Cutting Diameter (Decimal Inch):
0.6250"
Cutting Diameter (mm):
15.88mm
Shank Diameter (Inch):
5/8"
Shank Diameter (Decimal Inch):
0.6250"
Shank Diameter (mm):
15.88mm
Overall Length (Inch):
3-1/2"
Overall Length (Decimal Inch):
3.5000"
Overall Length (mm):
88.90mm
Length of Cut (Inch):
1-1/4"
Length of Cut (Decimal Inch):
1.2500"
Length of Cut (mm):
31.75mm
Corner Radius (Inch):
2/67"
Corner Radius (Decimal Inch):
0.0300"
Corner Radius (mm):
0.76mm
Finish/Coating:
MN (MEGACOAT NANO)
Number of Flute:
4
interval quantity:
1
SKU:
25363049
Weight:
1.23 LBS
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout

Features:

  • Open end tooth design to facilitate a smooth and efficient chip evacuation when used in axial applications such as Plunging, Ramping, & Helical Interpolation
  • Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
  • Unequal helix design and Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
  • End teeth featuring a wiper flat to increase corner strength and significantly improve workpiece floor surface finish
  • Optimized tool life and high metal removal rates through Kyocera proprietary PVD MEGACOAT NANO (MN) coating
  • Enhanced corner geometry with tight tolerance corner radii
 
Product Specifications
Manufacturer Part Number39894
Cutting Diameter (Inch)5/8"
Cutting Diameter (Decimal Inch)0.625"
Cutting Diameter (mm)15.88mm
Shank Diameter (Inch)5/8"
Shank Diameter (Decimal Inch)0.625"
Shank Diameter (mm)15.88mm
Length of Cut (Inch)1-1/4"
Length of Cut (Decimal Inch)1.250"
Length of Cut (mm)31.75mm
Overall Length (Inch)3-1/2"
Overall Length (Decimal Inch)3.500"
Overall Length (mm)88.90mm
Corner Radius (Decimal Inch)0.030"
Corner Radius (mm)0.76mm
Shank Length (Inch)2-1/4"
Shank Length (Decimal Inch)2.250"
Shank Length (mm)57.15mm
Shank Diameter Toleranceh6
Flute TypeSpiral
Number of Flutes4
Center CuttingYes
Chip BreakerNo
High PerformanceYes
CoatingMN (MEGACOAT NANO)
Product TypeCorner Radius End Mill

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

Brand:
SGS
Cutting Diameter (Inch):
5/8"
Cutting Diameter (Decimal Inch):
0.6250"
Cutting Diameter (mm):
15.88mm
Shank Diameter (Inch):
5/8"
Shank Diameter (Decimal Inch):
0.6250"
Shank Diameter (mm):
15.88mm
Overall Length (Inch):
3-1/2"
Overall Length (Decimal Inch):
3.5000"
Overall Length (mm):
88.90mm
Length of Cut (Inch):
1-1/4"
Length of Cut (Decimal Inch):
1.2500"
Length of Cut (mm):
31.75mm
Corner Radius (Inch):
2/67"
Corner Radius (Decimal Inch):
0.0300"
Corner Radius (mm):
0.76mm
Finish/Coating:
MN (MEGACOAT NANO)
Number of Flute:
4
interval quantity:
1