Features:
- Open end tooth design to facilitate a smooth and efficient chip evacuation when used in axial applications such as Plunging, Ramping, & Helical Interpolation
- Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
- Unequal helix design and Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
- End teeth featuring a wiper flat to increase corner strength and significantly improve workpiece floor surface finish
- Optimized tool life and high metal removal rates through Kyocera proprietary PVD Ti-NAMITE-X (TX) coating
- Enhanced corner geometry with tight tolerance corner radii
Product Specifications
Manufacturer Part Number | 47809 |
Cutting Diameter (Decimal Inch) | 0.315" |
Cutting Diameter (mm) | 8.00mm |
Shank Diameter (Decimal Inch) | 0.315" |
Shank Diameter (mm) | 8.00mm |
Length of Cut (Decimal Inch) | 0.748" |
Length of Cut (mm) | 19.00mm |
Overall Length (Decimal Inch) | 2.480" |
Overall Length (mm) | 63.00mm |
Corner Radius (Decimal Inch) | 0.020" |
Corner Radius (mm) | 0.50mm |
Shank Length (Decimal Inch) | 1.732" |
Shank Length (mm) | 43.99mm |
Shank Diameter Tolerance | h6 |
Flute Type | Spiral |
Number of Flutes | 4 |
Center Cutting | Yes |
Chip Breaker | No |
High Performance | Yes |
Coating | TX (Ti-NAMITE-X) |
Product Type | Corner Radius End Mill |

Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
SGS
Cutting Diameter (Inch):
23/73"
Cutting Diameter (Decimal Inch):
0.3150"
Cutting Diameter (mm):
8.00mm
Shank Diameter (Inch):
23/73"
Shank Diameter (Decimal Inch):
0.3150"
Shank Diameter (mm):
8.00mm
Overall Length (Inch):
2-12/25"
Overall Length (Decimal Inch):
2.4800"
Overall Length (mm):
63.00mm
Length of Cut (Inch):
3/4"
Length of Cut (Decimal Inch):
0.7480"
Length of Cut (mm):
19.00mm
Corner Radius (Inch):
1/50"
Corner Radius (Decimal Inch):
0.0200"
Corner Radius (mm):
0.51mm
Finish/Coating:
TX (Ti-NAMITE-X)
Number of Flute:
4
interval quantity:
1