714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Product Specifications
| EDP Number | XGMF17024 |
| Diameter (Decimal Inch) | 0.3750" |
| Diameter (Inch) | 3/8" |
| Diameter (mm) | 9.53mm |
| Neck Diameter (Decimal Inch) | 0.3510" |
| Neck Diameter (Inch) | 33/94" |
| Neck Diameter (mm) | 8.92mm |
| Shank Diameter (Decimal Inch) | 0.3750" |
| Shank Diameter (Inch) | 3/8" |
| Shank Diameter (mm) | 9.53mm |
| Length of Cut (Decimal Inch) | 0.3750" |
| Length of Cut (Inch) | 3/8" |
| Length of Cut (mm) | 9.53mm |
| Length Below Shank (Decimal Inch) | 0.6890" |
| Length Below Shank (Inch) | 31/45" |
| Length Below Shank (mm) | 17.50mm |
| Coupling Diameter (Decimal Inch) | 0.2560" |
| Coupling (Inch) | 11/43" |
| Coupling (mm) | 6.50mm |
| Wrench Width (Decimal Inch) | 0.3150" |
| Wrench Width (Inch) | 23/73" |
| Wrench Width (mm) | 8.00mm |
| Ball Nose Radius (Decimal Inch) | 0.1875" |
| Ball Nose Radius (Inch) | 3/16" |
| Ball Nose Radius (mm) | 4.76mm |
| Number of Flutes | 4 |
| Series | XGMF17 |
| Thread | M6 |
| Wrench Code | SPIS0810 |
| Helix Angle (Degree) | 30 Degree |
| Material | Carbide |
| Application | P |
| Cutting Direction | Right Hand |
| Cut Type | Center Cut |
| Type | Ball Nose |
| Product Type | Ball End Mill Head |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
YG1
Helix Angle:
30 Degree
Center Cutting (yes/no):
Yes
Application:
P
interval quantity:
1
