714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Product Specifications
| EDP Number | XGMF20040040 |
| Diameter (Decimal Inch) | 0.6250" |
| Diameter (Inch) | 5/8" |
| Diameter (mm) | 15.88mm |
| Neck Diameter (Decimal Inch) | 0.5910" |
| Neck Diameter (Inch) | 13/22" |
| Neck Diameter (mm) | 15.01mm |
| Shank Diameter (Decimal Inch) | 0.6250" |
| Shank Diameter (Inch) | 5/8" |
| Shank Diameter (mm) | 15.88mm |
| Length of Cut (Decimal Inch) | 0.6250" |
| Length of Cut (Inch) | 5/8" |
| Length of Cut (mm) | 15.88mm |
| Length Below Shank (Decimal Inch) | 1.0040" |
| Length Below Shank (Inch) | 1" |
| Length Below Shank (mm) | 25.50mm |
| Coupling Diameter (Decimal Inch) | 0.3350" |
| Coupling (Inch) | 1/3" |
| Coupling (mm) | 8.51mm |
| Wrench Width (Decimal Inch) | 0.5120" |
| Wrench Width (Inch) | 21/41" |
| Wrench Width (mm) | 13.00mm |
| Corner Radius (Decimal Inch) | 0.0400" |
| Corner Radius (Inch) | 1/25" |
| Corner Radius (mm) | 1.02mm |
| Number of Flutes | 4 |
| Series | XGMF20 |
| Thread | M8 |
| Wrench Code | SPIS1300 |
| Helix Angle (Degree) | 27 Degree/30 Degree |
| Material | Carbide |
| Application | P |
| Cutting Direction | Right Hand |
| Cut Type | Center Cut |
| Type | Corner Radius |
| Product Type | Corner Radius End Mill Head |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
