SGS

SGS

SGS 47496 | 0.315" Diameter x 0.315" Shank x 0.945" LOC x 2.953" OAL x 0.020" Radius 5 Flute AlTiN (Ti-NAMITE-A) Coated Corner Radius End Mill

SGS

SGS 37517 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.010" Radius 5 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 37516 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.010" Radius 5 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 37519 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.010" Radius 5 Flute TM (Ti-NAMITE-M) Coated Corner Radius End Mill

SGS

SGS 37518 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.010" Radius 5 Flute TM (Ti-NAMITE-M) Coated Corner Radius End Mill

SGS

SGS 37513 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL 5 Flute TM (Ti-NAMITE-M) Coated Chip Breaker Square End Mill

SGS

SGS 37512 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL 5 Flute TM (Ti-NAMITE-M) Coated Chip Breaker Square End Mill

SGS

SGS 37515 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.010" Radius 5 Flute AlTiN (Ti-NAMITE-A) Coated Corner Radius End Mill

SGS

SGS 37514 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.010" Radius 5 Flute AlTiN (Ti-NAMITE-A) Coated Corner Radius End Mill

SGS

SGS 37509 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL 5 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Square End Mill

SGS

SGS 37508 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL 5 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Square End Mill

SGS

SGS 37511 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL 5 Flute TM (Ti-NAMITE-M) Coated Square End Mill