SGS

SGS

SGS 37538 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.060" Radius 5 Flute AlTiN (Ti-NAMITE-A) Coated Corner Radius End Mill

SGS

SGS 37565 | 0.625" Diameter x 0.625" Shank x 1.875" LOC x 4.000" OAL 5 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Square End Mill

SGS

SGS 37564 | 0.625" Diameter x 0.625" Shank x 1.875" LOC x 4.000" OAL 5 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Square End Mill

SGS

SGS 37567 | 0.625" Diameter x 0.625" Shank x 1.875" LOC x 4.000" OAL 5 Flute TM (Ti-NAMITE-M) Coated Square End Mill

SGS

SGS 37566 | 0.625" Diameter x 0.625" Shank x 1.875" LOC x 4.000" OAL 5 Flute TM (Ti-NAMITE-M) Coated Square End Mill

SGS

SGS 37561 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.120" Radius 5 Flute TM (Ti-NAMITE-M) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 37560 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.120" Radius 5 Flute TM (Ti-NAMITE-M) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 37563 | 0.625" Diameter x 0.625" Shank x 1.875" LOC x 4.000" OAL 5 Flute AlTiN (Ti-NAMITE-A) Coated Square End Mill

SGS

SGS 37562 | 0.625" Diameter x 0.625" Shank x 1.875" LOC x 4.000" OAL 5 Flute AlTiN (Ti-NAMITE-A) Coated Square End Mill

SGS

SGS 37557 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.120" Radius 5 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 37556 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.120" Radius 5 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 37559 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.120" Radius 5 Flute TM (Ti-NAMITE-M) Coated Corner Radius End Mill