SGS

SGS

SGS 77373 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL x 0.060" Radius 7 Flute TM (Ti-NAMITE-M) Coated Corner Radius End Mill

SGS

SGS 77372 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL x 0.060" Radius 7 Flute AlTiN (Ti-NAMITE-A) Coated Corner Radius End Mill

SGS

SGS 77371 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL x 0.030" Radius 7 Flute TM (Ti-NAMITE-M) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 77370 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL x 0.030" Radius 7 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 77377 | 0.625" Diameter x 0.625" Shank x 1.563" LOC x 3.750" OAL 7 Flute TM (Ti-NAMITE-M) Coated Square End Mill

SGS

SGS 77376 | 0.625" Diameter x 0.625" Shank x 1.563" LOC x 3.750" OAL 7 Flute AlTiN (Ti-NAMITE-A) Coated Square End Mill

SGS

SGS 77375 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL x 0.060" Radius 7 Flute TM (Ti-NAMITE-M) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 77374 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL x 0.060" Radius 7 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 77381 | 0.625" Diameter x 0.625" Shank x 1.563" LOC x 3.750" OAL x 0.030" Radius 7 Flute TM (Ti-NAMITE-M) Coated Corner Radius End Mill

SGS

SGS 77380 | 0.625" Diameter x 0.625" Shank x 1.563" LOC x 3.750" OAL x 0.030" Radius 7 Flute AlTiN (Ti-NAMITE-A) Coated Corner Radius End Mill

SGS

SGS 77379 | 0.625" Diameter x 0.625" Shank x 1.563" LOC x 3.750" OAL 7 Flute TM (Ti-NAMITE-M) Coated Chip Breaker Square End Mill

SGS

SGS 77378 | 0.625" Diameter x 0.625" Shank x 1.563" LOC x 3.750" OAL 7 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Square End Mill