SGS

SGS

SGS 77365 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL 7 Flute TM (Ti-NAMITE-M) Coated Square End Mill

SGS

SGS 77364 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL 7 Flute AlTiN (Ti-NAMITE-A) Coated Square End Mill

SGS

SGS 77363 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.060" Radius 7 Flute TM (Ti-NAMITE-M) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 77362 | 0.500" Diameter x 0.500" Shank x 1.500" LOC x 3.500" OAL x 0.060" Radius 7 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 77369 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL x 0.030" Radius 7 Flute TM (Ti-NAMITE-M) Coated Corner Radius End Mill

SGS

SGS 77368 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL x 0.030" Radius 7 Flute AlTiN (Ti-NAMITE-A) Coated Corner Radius End Mill

SGS

SGS 77367 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL 7 Flute TM (Ti-NAMITE-M) Coated Chip Breaker Square End Mill

SGS

SGS 77366 | 0.500" Diameter x 0.500" Shank x 2.000" LOC x 4.000" OAL 7 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Square End Mill

SGS

SGS 77341 | 0.500" Diameter x 0.500" Shank x 1.250" LOC x 3.250" OAL 7 Flute TM (Ti-NAMITE-M) Coated Square End Mill

SGS

SGS 77340 | 0.500" Diameter x 0.500" Shank x 1.250" LOC x 3.250" OAL 7 Flute AlTiN (Ti-NAMITE-A) Coated Square End Mill

SGS

SGS 74911 | 0.984" Diameter x 0.984" Shank x 3.937" LOC x 6.693" OAL x 0.118" Radius 7 Flute TM (Ti-NAMITE-M) Coated Chip Breaker Corner Radius End Mill

SGS

SGS 74910 | 0.984" Diameter x 0.984" Shank x 3.937" LOC x 6.693" OAL x 0.118" Radius 7 Flute AlTiN (Ti-NAMITE-A) Coated Chip Breaker Corner Radius End Mill