714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Product Specifications
| EDP Number | EM669080 |
| Diameter (Decimal Inch) | 0.3100" |
| Diameter (Inch) | 23/73" |
| Diameter (mm) | 8.00mm |
| Shank Diameter (Decimal Inch) | 0.3150" |
| Flat on Ball (mm) | 3.05mm |
| Shank Diameter (Inch) | 23/73" |
| Shank Diameter (mm) | 8.00mm |
| Length of Cut (Decimal Inch) | 0.3543" |
| Length of Cut (Inch) | 28/79" |
| Length of Cut (mm) | 9.00mm |
| Length Below Shank (Decimal Inch) | 1.4173" |
| Length Below Shank (Inch) | 1-5/12" |
| Length Below Shank (mm) | 36.00mm |
| Overall Length (Decimal Inch) | 3.9370" |
| Overall Length (mm) | 100.00mm |
| Ball Nose Radius (Decimal Inch) | 0.1575" |
| Ball Nose Radius (Inch) | 3/19" |
| Overall Length (Inch) | 3-15/16" |
| Neck Diameter (Decimal Inch) | 0.2559" |
| Ball Nose Radius (mm) | 4.00mm |
| Neck Diameter (Inch) | 11/43" |
| Neck Diameter (mm) | 6.50mm |
| Number of Flutes | 2 |
| Flat on Ball (Decimal Inch) | 0.1200" |
| Flat on Ball (Inch) | 1/8" |
| Series | EM669 |
| Helix Angle (Degree) | 30 Degree |
| Shank Style | Plain |
| Coating | ALTiN |
| Cut Type | Center Cut |
| Length Type | Long |
| Material | Carbide |
| Cutting Direction | Right |
| Application | P |
| Produce Type | Ball Nose End Mill |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
