3M 7000119727 | 16121 PPS H/O Pressure Cup

3M PPS Type H/O Pressure Cup is a pressurized (H/O) hard cup and collar set that supports and holds 3M PPS flexible liner used in the 3M PPS (Legacy) paint preparation system. This product is intended for use in place of metal cups on most pressure spray guns.

3M PPS Type H/O Paint Pressure Cup, Collar and Air hose is designed to spray thick high-viscosity liquid material with the 3M Accuspray HGP Spray Gun along with original PPS lids and liners. With the pressure cup, air is forced through the air hose to push out the paint material and collapse the liner. Unlike conventional aluminum or other metal paint cup systems, with PPS you don't have to mix paint in extra cups and filter it into a paint reservoir, so you waste less material. Simply place a liner in the reusable paint cup, mix the material, snap on the lid, attach the locking collar and you're ready to spray. With a fresh lid and liner for each mix, there's less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems.

Features:

• 360 Degree Paint Range: System design allows you to consistently spray at any angle, even upside down

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov