714.897.1700
Chat
Email
Quotes
Quick Order
The 3M 7010515154 Cubitron II 984F ceramic belt is a high-performance abrasive made for precise metal preparation and finishing. This 0.5" × 12.0" format is designed to reach narrow fixtures and detail work that larger belts cannot. Precision-shaped ceramic grain technology maintains sharp cutting edges for consistent stock removal in tough alloys. The formulation with 36+ grit removes material aggressively while maintaining a controllable surface for subsequent operations. The Fabri-Lok splice construction creates a reinforced, flexible joint suitable for intermittent and fixture-based cycles. A YF-weight polyester cloth backing provides dimensional stability and resists stretch under load. Closed-coat abrasive application concentrates cutting points for more efficient deburring, blending, and surface preparation. When a tight-access tool needs to perform like a 36 grit sanding disc, use the 3M cubitron 984F II ceramic belt. Its small footprint makes it ideal for precision polishing, weld blending, and pre-finishing on hard-to-reach surfaces. Technicians value the 3M 7010515154 because it produces consistent results and requires fewer changeovers in high-mix, low-volume fixtures.
Narrow 0.5" × 12" Precision Format
The slim profile enables use in confined tooling and fixture slots, delivering targeted performance similar to a 36 grit sanding disc.
Self-Sharpening Ceramic Grain
Precision-shaped ceramic grains fracture to expose new cutting points, maintaining aggressive removal typical of 36 grit 3M cubitron media.
Fabri-Lok Reinforced Splice
Fabric-backed splice increases seam durability and smooth tracking for short-run production and intermittent bench cycles.
YF-Weight Polyester Backing
Robust cloth backing resists elongation and supports consistent contact pressure during finishing and deburring operations.
Closed-Coat High-Density Abrasive
Dense grain application maximizes cut-per-pass for faster removal and fewer belt swaps compared with conventional 36 grit grinding disc options.
| Manufacturer Part Number | 7010515154 |
| Overall Length (Inch) | 12.0" |
| Overall Length (mm) | 304.8mm |
| Overall Width (Inch) | 0.5" |
| Overall Width (mm) | 12.7mm |
| Abrasive Material | Precision Shaped Ceramic |
| Application | Finishing, Polishing, Surface Preparation, Deburring, Grinding |
| Backing Material | Polyester Cloth |
| Backing Weight | YF Weight |
| Coat Type | Closed Coat |
| Color Family | Red |
| Flex Type | Single-Flex |
| Grit | 36+ |
| Splice Type | Fabri-Lok |
| Product Form | Belt |
| Product Number | 984F |
What is the 3M 7010515154 best suited for?
The 3M 7010515154 excels at detailed deburring, weld blending and edge work where a compact 36 grit sanding disc alternative is required.
Will this narrow belt work in fixture-based tools?
Yes, the 0.5" × 12" size and Fabri-Lok splice are designed for reliable use in fixture and bench-mounted applications.
How does the 3M cubitron 984F II ceramic belt compare to a 36 grit grinding disc?
It offers similar aggressive removal but in a narrow, belt form factor better suited to confined or linear finishing tasks.
Can the 3M 984F handle repeated short cycles?
Yes, the reinforced splice and YF-weight backing provide durability for frequent start/stop use in production fixtures.
What is 36 grit sandpaper used for in metalworking?
The 36-grit abrasives are used for heavy stock removal and initial shaping, roles where this 36+ grit 3M 7010515154 belt performs in tight spots.
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
