3M Scotch-Weld Plastic & Rubber Instant Adhesive PR100 is formulated for exceptional performance on difficult-to-bond substrates, such as EPDM, polypropyleneand polyethylene, with the use of an appropriate primer. When applied, this adhesive has a short handling time of 20 seconds, with a full cure in 24 hours; once cured, it creates a strong, durableand lasting bond, with high overlap shear strength. During use, 3M Scotch-Weld Plastic & Rubber Instant Adhesive PR100's flexible container allows for two application methods, either pinch for a precise drop, or squeeze for a steady bead.
3M Scotch-Weld Plastic & Rubber Instant Adhesive PR100 is formulated for exceptional performance on difficult-to-bond substrates, such as EPDM, polypropylene and polyethylene, with the use of an appropriate primer. When applied, this adhesive has a short handling time of 20 seconds, with a full cure in 24 hours; once cured, it creates a strong, durable and lasting bond, with high overlap shear strength. During use, 3M Scotch-Weld Plastic & Rubber Instant Adhesive PR100's flexible container allows for two application methods, either pinch for a precise drop, or squeeze for a steady bead.
Features:
- Exceptional Performance on Difficult Substrates: Offers instant strength when bonding plastics, silicone rubberand EPDM as well as heavily plasticized PVC, EPDM, ABS, Nylon, Santoprene and Fluorocarbon
- Potential Applications: Gasket attachment, small joint assembly, jewelry assembly, sporting goodsand electronics
- Low Viscosity: Easily applied from the bottle for thin bond lines and precise application
- High Overlap Shear Strength Over: Instant fixturing; strong, durableand long-lasting bonds on a variety of substrates once fully cured
- Fast Time to Handling Strength: Handling strength in under 20 seconds, with a full cure achieved in 24 hours
- Dispensed from s Flexible Container: Pinch for a precise drop or squeeze for a steady bead
Manufacturer Part Number | 7100039200 |
Adhesive Type | Instant Adhesive |
Assembly Type | Mounting & Trim Attachment |
Color Family | Transparent |
Container Size (Inch) | 17.64 Ounce |
Container Size (mm) | 500.0 g |
Design Challenges | Impact & Shock Absorption |
For Use On | Silicone Gasket |
Full Cure Time | 24 Hours @ 72 F (22 C) |
Indoor/Outdoor | Both |
Maximum Operating Temperature (Celsius) | 82.0 Degree Celsius |
Maximum Operating Temperature (Fahrenheit) | 180.0 Degree Fahrenheit |
Net Weight (Inch) | 1.0 lbs. |
Net Weight (mm) | 500.0 g |
Physical Form | Liquid |
Product Color | Transparent |
Product Form | Bottle |
Product Key | PR100 |
Product Number | PR100 |
Set Time | 10 to 30 Second |
Shear Strength | 2100.0 psi |
Storage Temperature | 40 Degree Fahrenheit |
Storage Temperature (Celsius) | 4 °C |
Substrate 1 | EPDM Rubber |
Substrate 2 | High Surface Energy, (400-1100 Dynes/cm) |
Viscosity | Self-leveling |
Viscosity Range (cps) at Room Temperature | 100 |
Application | Plastic Repair , Bonding Composite Materials , Mounting & Trim Attachment , Equipment Maintenance , Gasket Assembly , Gasket Attachment , Bonding , Small Joint Assembly |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov