3M 7100168088 | 17.717" Diameter x 0.500" Thickness Cylindrical Grinding Wheel

3M Vitrified Grinding Wheels 91VB are the vitrified bonded wheels for optimizing roughing and finishing process steps while grinding gear parts.

Get high performance capability, less dressing and thermal damage, and higher productivity with 3M Vitrified Grinding Wheels-91VB. These vitrified bonded wheels combine the advantages of two key technologies, 3M Cubitron II precision shaped grain and the NA series grits, resulting in high performance roughing and finishing grinding steps for gear parts.

Requiring lower dressing time and providing longer intervals between dressing, they help to significantly decrease related dressing costs, cycle times during both roughing and the last step of the threaded gear parts finishing process, which can help to save substantial costs. They consistently perform well in terms of ffα values (profile errors) and provide good surface quality with very low Rz and Ra values. 3M 91NDA-91VB grinding wheels are ideal for assisting with machine balancing issues.

Features:

• Designed for crankshaft grinding
• Ideal self-sharpening and early chip formation
• Lower dressing cost thanks to higher dressing interval
• Powered by a special mix of alumina and ceramic grain
• Balances machine problems and can be used universally
• Delivers high performance and durability while rough grinding
• High process stability and constant quality for critical workpieces
• Lower temperature during grinding avoids thermal damages on the workpieces
• High gear quality – profile error ffα<2μm without any issues, surface roughness Rz<2,5μm
• Reduces grinding time by more than 20 % thanks to higher feed rate in roughing and finishing

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov