Features
- The 3200 General Purpose end mill has 4-flutes and was designed for use in titanium, super alloys, hardened steels, stainless steels, steels, cast iron, brass & copper, and low si aluminum
- It is offered in a variety of configurations and is available with single-end and double-end designs
- The 3200 General Purpose end mill is stocked uncoated and with FC-20, TiAlN, TiCN, and TiN coatings
Product Specifications
Cutting Diameter (Decimal Inch) | 0.1250" |
Cutting Diameter (mm) | 3.18mm |
Cutting Diameter (Inch) | 1/8" |
Cutting Flute Length (Decimal Inch) | 0.2500" |
Cutting Flute Length (mm) | 6.35mm |
Cutting Flute Length (Inch) | 1/4" |
Shank Diameter (Decimal Inch) | 0.1250" |
Shank Diameter (mm) | 3.18mm |
Shank Diameter (Inch) | 1/8" |
Overall Length (Decimal Inch) | 1.5000" |
Overall Length (mm) | 38.10mm |
Overall Length (Inch) | 1-1/2" |
Coating/Finish | Uncoated |
Metric/Inch | Inch |
Number of Flutes | 4 |
Helix Angle (Degrees) | 30 |
Flute Spiral Direction | Right Hand |
Direction of Cut | Right Hand |
Point End Type | Square |
End Type Character Designation | S |
End Type | Single End |
Coolant Through | Non Coolant Through |
Weldon Flat | No |
Length | Stub |
Length Designator | STB |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
Fullerton Tool
Mill Diameter (Inch):
1/8"
Number of Flutes:
4
Length of Cut (Inch):
1/4"
Length of Cut (Decimal Inch):
0.2500"
Length of Cut (mm):
6.35mm
Shank Diameter (inch):
1/8"
Shank Diameter (Decimal Inch):
0.1250"
Shank Diameter (mm):
3.18mm
Material:
Solid Carbide
Finish/Coating:
Uncoated
Single or Double End:
Single
Cutting Direction:
Right Hand
Flute Direction:
Right Hand
Center Cutting:
Yes
Ships:
From Partner Facility