714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Double clamp boring bar for holding a 80° trigon negative insert with an inscribed circle diameter of 12.7 mm, 4.76 mm thick (ISO designation WN.. 0804.. ), left hand 95° side and end cutting with off-set shank, steel with coolant hole, 40 mm diameter x 300 mm long for taper boring and longitudinal boring with and without shoulder.
Product Specifications
| EDP Number | 7028499 |
| Functional Height (mm) | 18.5 mm |
| Functional Width (mm) | 27 mm |
| Coolant Supply Property | 1 |
| Orthogonal Rake Angle | -6 |
| Inclination Angle | -13 |
| Connection Diameter (mm) | 40 mm |
| Connection Diameter (Inch) | 1.575" |
| Shank Height (mm) | 37 mm |
| Minimum Bore Diameter (mm) | 50 mm |
| Functional Length (mm) | 300 mm |
| Head Length (mm) | 36 mm |
| Clamping Type Code | System D |
| Direction of Tool | Left |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Ships:
From Partner Facility
