714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
- Full-diameter long point for shaft work and parts with large center holes
- A reduced-diameter long point for use when greater clearance is needed
- A small bull-nose point for use with tubes or parts with large center holes
- A female point with a 90 Degree included angle for locating on OD part chamfers
- A male point with a 90 Degree included angle for locating on internal part chamfers
Product Specifications
| Center Dimension A (Center Taper) | 5 MT |
| Center Dimension B (Inch) | 2.45 |
| Center Dimension E (Inch) | 2.780 |
| Weight of Workpiece (lbs.) | 925 |
| Center Dimension F (Inch) | 2.35 |
| Center Dimension G (Inch) | 0.75 |
| Max Suggested RPM | 5,000 |
| Thrust Load (lbs.) | 2,150 |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
Royal Products
