null

SGS 37599 | 0.625" Diameter x 0.625" Shank x 1.875" LOC x 4.000" OAL x 0.060" Radius 5 Flute TM (Ti-NAMITE-M) Coated Corner Radius End Mill

$246.55
Brand:
SGS
Cutting Diameter (Inch):
5/8"
Cutting Diameter (Decimal Inch):
0.6250"
Cutting Diameter (mm):
15.88mm
Shank Diameter (Inch):
5/8"
Shank Diameter (Decimal Inch):
0.6250"
Shank Diameter (mm):
15.88mm
Overall Length (Inch):
4"
Overall Length (Decimal Inch):
4.0000"
Overall Length (mm):
101.60mm
Length of Cut (Inch):
1-7/8"
Length of Cut (Decimal Inch):
1.8750"
Length of Cut (mm):
47.63mm
Corner Radius (Inch):
3/50"
Corner Radius (Decimal Inch):
0.0600"
Corner Radius (mm):
1.52mm
Finish/Coating:
TM (Ti-NAMITE-M)
Number of Flute:
5
interval quantity:
1
SKU:
25255804
Weight:
1.23 LBS
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
SGS 37599 | 0.625" Diameter x 0.625" Shank x 1.875" LOC x 4.000" OAL x 0.060" Radius 5 Flute TM (Ti-NAMITE-M) Coated Corner Radius End Mill

Features:

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials
 
Product Specifications
Manufacturer Part Number37599
Cutting Diameter (Inch)5/8"
Cutting Diameter (Decimal Inch)0.625"
Cutting Diameter (mm)15.88mm
Shank Diameter (Inch)5/8"
Shank Diameter (Decimal Inch)0.625"
Shank Diameter (mm)15.88mm
Length of Cut (Inch)1-7/8"
Length of Cut (Decimal Inch)1.875"
Length of Cut (mm)47.63mm
Overall Length (Inch)4"
Overall Length (Decimal Inch)4.000"
Overall Length (mm)101.60mm
Corner Radius (Decimal Inch)0.060"
Corner Radius (mm)1.52mm
Shank Diameter Toleranceh6
Flute TypeSpiral
Number of Flutes5
Center CuttingNo
Chip BreakerNo
High PerformanceYes
CoatingTM (Ti-NAMITE-M)
Product TypeCorner Radius End Mill

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

Brand:
SGS
Cutting Diameter (Inch):
5/8"
Cutting Diameter (Decimal Inch):
0.6250"
Cutting Diameter (mm):
15.88mm
Shank Diameter (Inch):
5/8"
Shank Diameter (Decimal Inch):
0.6250"
Shank Diameter (mm):
15.88mm
Overall Length (Inch):
4"
Overall Length (Decimal Inch):
4.0000"
Overall Length (mm):
101.60mm
Length of Cut (Inch):
1-7/8"
Length of Cut (Decimal Inch):
1.8750"
Length of Cut (mm):
47.63mm
Corner Radius (Inch):
3/50"
Corner Radius (Decimal Inch):
0.0600"
Corner Radius (mm):
1.52mm
Finish/Coating:
TM (Ti-NAMITE-M)
Number of Flute:
5
interval quantity:
1

Related Products