714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Features
- The gage consists of a nicely finished, hardened steel head and an accurate, machine divided, tempered steel rule
- These rules are either our 610N (6 inch) or our 635N (150mm) models
- Gage can be smoothly adjusted to the required measurement and then locked into position by a knurled nut
- Base is cut out on one side, adjacent to the rule, permitting easier readings and more accurate measurement
- 6" hook rule (236HC, ) also available, permitting readings from the edge of a workpiece to the edges of slots and shoulders. Graduated in 32nds, 64ths
Product Specifications
| Range (mm) | 0-150mm |
| Graduations (in) | .001" |
| Graduations (mm) | mm,1/2mm |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
Starrett
Type:
Steel Rule Depth Gage
Minimum Measurement (mm):
0mm
Maximum Measurement (mm):
150mm
Rule Length (Inch):
6"
Rule Length (Decimal Inch):
6.0000"
Rule Length (mm):
150mm
Base Length (Inch):
2-5/8"
Base Length (Decimal Inch):
2.6250"
Base Length (mm):
67mm
Material:
Hardened and Tempered Steel
Finish/Coating:
Brushed Steel
Graduation (Inch):
0"
Graduation (Decimal Inch):
0.0010"
Graduation (mm):
1mm, 0.5mm
Ships:
From Manufacturer
