714.897.1700
Chat
Email
Quotes
Quick Order
| EDP Number | EM902909 |
| Diameter (Decimal Inch) | 0.3100" |
| Diameter (Inch) | 23/73" |
| Diameter (mm) | 8.00mm |
| Shank Diameter (Decimal Inch) | 0.3937" |
| Shank Diameter (Inch) | 37/94" |
| Shank Diameter (mm) | 10.00mm |
| Length of Cut (Decimal Inch) | 0.5512" |
| Length of Cut (Inch) | 43/78" |
| Length of Cut (mm) | 14.00mm |
| Length Below Shank (Decimal Inch) | 2.1654" |
| Length Below Shank (Inch) | 2-1/6" |
| Length Below Shank (mm) | 55.00mm |
| Overall Length (Decimal Inch) | 4.7244" |
| Overall Length (mm) | 120.00mm |
| Ball Nose Radius (Decimal Inch) | 0.1575" |
| Ball Nose Radius (Inch) | 3/19" |
| Overall Length (Inch) | 4-71/98" |
| Neck Diameter (Decimal Inch) | 0.3937" |
| Ball Nose Radius (mm) | 4.00mm |
| Neck Diameter (Inch) | 37/94" |
| Neck Diameter (mm) | 10.mm |
| Under Neck Parallel (Decimal Inch) | 0.6693" |
| Under Neck Parallel (Inch) | 2/3" |
| Under Neck Parallel (mm) | 17.00mm |
| Number of Flutes | 2 |
| Neck Taper Angle (Degree) | 1 Degree 30' |
| Series | EM902 |
| Helix Angle (Degree) | 30 Degree |
| Shank Style | Plain |
| Coating | ALTiN |
| Cut Type | Center Cut |
| Material | Carbide |
| Cutting Direction | Right |
| Application | P |
| Produce Type | Taper Neck Ball Nose End Mill |
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
