3M 7000002054 | 07194 3.400" Height 4.200" OAL Filter

Packout consists of 6 each (3 pair) of Particulate P95 Filters (5P71). Can be used with 3M 5000 Series Respirators or 3M 6000 Series Cartridges or 3M Filter Adapter 603, and 3M Filter Retainer 501.The 3M Replacement P95 Particulate Filter 5P71 helps provide respiratory protection against a wide range of oil and non-oil based particulate contaminants. MUST BE USED with appropriate 3M 5000 Series Respirators or 6000 Series Cartridges for various applications including spray painting, lacquering, petrochemical and chemical manufacturing, and pesticide spraying and agriculture for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces.

When used with the appropriate respirator, the filter protects against: 1) solids such as those from processing minerals, coal, iron ore, cotton, , and certain other substances; 2) liquids or oil based particles from sprays that do not emit harmful vapors; and 3) metal fumes produced from , brazing, cutting, and other operations involving heating of metals. This filter has been rated P95, which means it filters at least 95% of airborne particles and is strongly resistant to oil. Before use, they are must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910. 134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94. 4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U. S. A. at 1-800-243-4630.

In Canada, call 1-800-267-4414. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. g., U. S. OSHA, ANSI), as they as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult the on-site safety professional, industrial hygienist, or other subject matter expert.

Features:

• Must be used with 3M 5000 series respirators or 3M cartridges 6000 Series gas and vapor cartridges (also with 3M 501 Retainer when particles are also present)
• NIOSH Approved for environments containing certain oil and non-oil-based particles. Rated P95 filtering at least 95% of airborne particles and is strongly resistant to oil
• Reduce exposure to particulates when used on top of 3M 603 Filter Holder and 3M 501 Retainer. Solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances
• Reduce exposure to metal fumes produced from welding, brazing, cutting, and other operations involving heating of metals
• Reduce exposure to liquids or oil-based particles from sprays that do not emit harmful vapors
• Various applications including spray painting, lacquering, petrochemical and chemical manufacturing, and pesticide spraying and agriculture when used with appropriate 3M 5000 Series Respirators or 6000 Series Cartridges

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov