3M 7000126938 | 7093CB 2.300" Height x 3.400" OAL Filter

NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M Respirators 5000 Series or 3M Cartridges 6000 Series or 3M Filter Adapter 603, and 3M Filter Retainer 501.3M recommended for relief against nuisance levels of organic vapor and acid gases. Nuisance level organic vapor and acid gas refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is. Not NIOSH-approved for organic vapors or acid gases. Do not use for respiratory protection against organic vapors or acid gases (except hydrogen fluoride). This cartridge/ filter is NIOSH approved and provides the highest level of protection against oil and non-oil based particles. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter.

Before use, they are must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630.

Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as they as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death, or property damage. For help with product selection and use, consult the on-site safety professional, industrial hygienist, or other subject matter expert.

Features:

• 3M recommended for relief against nuisance levels of organic vapor and acid gases (concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower)
• Use with 3M Half and Full Face Pieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter
• Swept back design allows an enhanced field of view and increased comfort
• Simple Seal Check: Unique, spring-loaded filter cover design simplifies negative pressure user seal checks
• LIGHTWEIGHT, LOW PROFILE design combines P100 filtration with carbon-loaded features found in heavier combination cartridge products
• Variety of Uses: When properly fitted, use in a variety of applications including welding, brazing torch cutting, metal pouring, soldering
• Easy Twist on and Off: Bayonet connection twist on and off easily for quick assembly and disassembly with many 3M half and full facepiece designs
• For industrial/occupational use only.

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov