Features:
- Open end tooth design to facilitate a smooth and efficient chip evacuation when used in axial applications such as Plunging, Ramping, & Helical Interpolation
- Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
- Unequal helix design and Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
- End teeth featuring a wiper flat to increase corner strength and significantly improve workpiece floor surface finish
- Optimized tool life and high metal removal rates through Kyocera proprietary PVD MEGACOAT NANO (MN) coating
- Enhanced corner geometry with tight tolerance corner radii
Product Specifications
Manufacturer Part Number | 39862 |
Cutting Diameter (Inch) | 1/2" |
Cutting Diameter (Decimal Inch) | 0.500" |
Cutting Diameter (mm) | 12.70mm |
Shank Diameter (Inch) | 1/2" |
Shank Diameter (Decimal Inch) | 0.500" |
Shank Diameter (mm) | 12.70mm |
Length of Cut (Inch) | 1" |
Length of Cut (Decimal Inch) | 1.000" |
Length of Cut (mm) | 25.40mm |
Overall Length (Inch) | 3" |
Overall Length (Decimal Inch) | 3.000" |
Overall Length (mm) | 76.20mm |
Corner Radius (Decimal Inch) | 0.010" |
Corner Radius (mm) | 0.25mm |
Shank Length (Inch) | 2" |
Shank Length (Decimal Inch) | 2.000" |
Shank Length (mm) | 50.80mm |
Shank Diameter Tolerance | h6 |
Flute Type | Spiral |
Number of Flutes | 4 |
Center Cutting | Yes |
Chip Breaker | No |
High Performance | Yes |
Coating | MN (MEGACOAT NANO) |
Product Type | Corner Radius End Mill |

Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
SGS
Cutting Diameter (Inch):
1/2"
Cutting Diameter (Decimal Inch):
0.5000"
Cutting Diameter (mm):
12.70mm
Shank Diameter (Inch):
1/2"
Shank Diameter (Decimal Inch):
0.5000"
Shank Diameter (mm):
12.70mm
Overall Length (Inch):
3"
Overall Length (Decimal Inch):
3.0000"
Overall Length (mm):
76.20mm
Length of Cut (Inch):
1"
Length of Cut (Decimal Inch):
1.0000"
Length of Cut (mm):
25.40mm
Corner Radius (Decimal Inch):
0.0100"
Finish/Coating:
MN (MEGACOAT NANO)
Number of Flute:
4
interval quantity:
1