3M Scotch-Weld Instant Adhesive CA40H is a clear, medium viscosity instant adhesive. The CA40H instant adhesive is formulated for better void filling capabilities than lower viscosity instant adhesives. Once applied, the glue has fast handling time and cure to keep jobs moving quickly.
Instant Results with More Control3M Scotch-Weld Instant Adhesive CA40H is a cyanoacrylate, high viscosity, instant adhesive. Its high viscosity helps prevent run off during application and its slower set time (5 to 40 seconds) allows additional time for proper alignment of parts. Once bonded, the adhesive will fully cure in just 24 hours. It can withstand a wide variety of temperatures ranging from- 65°F/-54°C to 212°F/100°C. 3M Scotch-Weld Instant Adhesive CA40H exhibits good resistance to soap solutions and isopropyl alcohol. This adhesive will bond to an extremely wide selection of materials and is useful in applications in most industries.
Recommended Applications- Aluminum
- EPDM rubber
- Flexible vinyl
- Most cured rubbers
- Most plastics
- General bonding applications
Cyanoacrylate adhesives (instant adhesives) are single component, lower viscosity liquids that cure extremely quickly with just contact pressure and surface moisture. They adhere well, with thin bond lines, to plastics, metals and rubbers. With the use of primers, they can also adhere to low surface energy plastics and elastomers. They have lower flexibility, peel strength and impact resistance compared to other structural adhesives. They are generally used for gasket bonding and smaller assemblies.
Features:
- Enables more controlled and precise application with less mess and run off
- High strength and impact resistance
- Reaches handling strength in under 40 seconds
- Medium viscosity adhesive is easily applied from the bottle
Manufacturer Part Number | 7000000895 |
Adhesive Type | Instant Adhesive |
Color Family | Transparent |
Container Size (Inch) | 1.0 fl oz (US) |
Container Size (mm) | 29.57 ml |
Design Challenges | Impact & Shock Absorption |
For Use On | Paper & Cardboard |
Full Cure Time | 24 Hours @ 72 F (22 C) |
Indoor/Outdoor | Both |
Maximum Operating Temperature (Celsius) | 93.0 Degree Celsius |
Maximum Operating Temperature (Fahrenheit) | 175.0 Degree Fahrenheit |
Physical Form | Liquid |
Product Color | Transparent |
Product Form | Bottle |
Product Key | CA40H |
Product Number | CA40H |
Product Type | Instant Adhesive |
Set Time | 5-40 Seconds |
Shear Strength | 1700.0 psi |
Specific Gravity | 8.7 Pound Per Gallon (US) |
Storage Temperature | 72 Degree Fahrenheit |
Storage Temperature (Celsius) | 22℃ |
Substrate 1 | EPDM Rubber |
Substrate 2 | Plastic (Flexible Vinyl) |
Viscosity | Self-leveling |
Viscosity Range (cps) at Room Temperature | 400-600 |
Volume (Inch) | 1.0 fl oz |
Volume (mm) | 29.57 mL |
Application | Gasket Attachment , Plastic Repair , Equipment Maintenance , Mounting & Trim Attachment , Gasket Assembly , Bonding , Small Joint Assembly , Bonding Composite Materials |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov