3M 7000000958 | Scotch-Weld Pneumatic Applicator

3M Scotch-Weld PUR Easy 250 Applicator is a self-contained, hand held pneumatic applicator designed to dispense cartridges of 3M Scotch-Weld PUR Adhesives. These adhesives are applied warm and can bond a wide variety of substrates such as wood, fiber reinforced plastic (FRP) and many other plastics to themselves, to metal and to glass. The proprietary nozzle makes clean up a breeze.

With the hand-held 3M Scotch-Weld PUR Easy 250 Applicator, you have the practical benefits of two technologies in your assembly operation. This single component system combines structural adhesive benefits and hot melt adhesive speed for wood, plastic and more. One-component and moisture curing eliminates metering, mixing and curing time and equipment, for efficient operation. The electrically-heated pneumatic applicator dispenses adhesive at 250 ° F(121 degree C) with the squeeze of a trigger. The adhesive can be kept at optimum temperature by using the 3M Scotch-Weld PUR Easy 250 Preheater for easy swap out or can stay in the applicator at dispensing temperature for up to 16 hours cumulatively.

• Plastics assembly
• Window and glass applications
• Difficult to bond to vinyl and plasticized materials, including fabrics, trims and foams
• Wood or plastic decorative trim and moldings for furniture and cabinets

3M Scotch-Weld PUR Adhesives are one-component, moisture-curing urethane adhesives that are applied warm to create dramatically strong bonds to a variety of substrates such as wood, fiber reinforced plastic (FRP) and many other plastics to themselves, to metal and to glass. Fast-acting strength begins to build as the adhesives cool for rapid, convenient application with minimal downtime from clamping or fixturing. These adhesives can be extruded from hand held or bench mounted 3M Scotch-Weld PUR Adhesive Applicators.

PURs offer attractive options: from woodworkers searching for thin bond lines and replacing unsightly mechanical fasteners, to plastic, glass and metal materials assembly in automotive, electronics, general assembly and many other industries.

Features:

• Electrically-heated pneumatic applicator at 250 ° F(121 degree C) with the squeeze of a trigger
• Designed exclusively for 3M scotch-weld pur adhesives
• Easy to use and maintain with unique disposable nozzle, no tip cap, no grease, no system purging
• Adhesive can stay in applicator at dispensing temperature for up to 16 hours
• UL rated

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov