3M 7000052600 | 37173 2.300" Height 3.400" OAL Filter

NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M Respirators 5000 Series or 3M Cartridges 6000 Series or 3M Filter Adapter 603, and 3M Filter Retainer 501.The 3M Hydrogen Fluoride Cartridge/Filter 7093C is NIOSH approved and provides the highest level of protection against oil and non-oil based particles. Use with 3M Half Face and Full Face Respirators 6000, 7000 and FF-400 Series with bayonet filter holders. When properly fitted, use in a variety of applications including , brazing torch cutting, metal , soldering and exposure to lead, asbestos, cadmium, arsenic, Methylenedianiline (MDA) and Hydrogen Fluoride (HF) for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half face respirators or 50 times PEL with full face respirators. This filter also provides nuisance level protection against organize vapors and acid gas exposures.

Full face respirators must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are Immediately Dangerous to Life or Health (IDLH).3M recommended for relief against nuisance levels of organic vapor and acid gases. Nuisance level organic vapor and acid gas refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is. Not NIOSH-approved for organic vapors or acid gases. Do not use for respiratory protection against organic vapors or acid gases (except hydrogen fluoride). Before use, they are must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate.

Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as they as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult the on-site safety professional, industrial hygienist, or other subject matter expert.

Features:

• NIOSH Approved and provides the highest level of protection against oil and non-oil based particles
• Use with 3M Half Face and Full Face Respirators 6000, 7000 and FF-400 Series with bayonet cartridge/filter holders
• Channeled Airflow protects filter for enhanced breathability and longer service life
• Simplifies User Seal Checks: Unique, spring-loaded filter cover design simplifies negative pressure user seal checks
• Applications: Welding, brazing, torch cutting, metal pouring, soldering and exposure to lead, asbestos, cadmium, arsenic, Methylenedianiline (MDA) and Hydrogen Fluoride (HF)
• For industrial/occupational use only.

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov