3M 7000121350 | 1.000" Width x 3.000" OAL x 22 lbs. Capacity 3797 Off-white Hot Melt Adhesive

3M Hot Melt Adhesive 3797 is a temperature resistant, low viscosity adhesive which flows easily into small areas for effective coverage and protection, ideal for electrical potting. This 100% solids thermoplastic adhesive also provides a quick 30-second open bead time for potting even at depth. It is best used with 3M Hot Melt Applicator PG II-excellent for high volume operations.

Ideal as an electrical potting adhesive and for other applications involving electrical and electronic components,3M Hot Melt Adhesive 3797 is a 100% solids thermoplastic low melt adhesive that combines low viscosity with high temperature resistance. This makes it ideal for applications where protection and long-term stability are critical. This hot melt adhesive is formulated to flow easily and smoothly into small areas such as those on printed circuit boards and for quick set times-about 30 seconds of open time for effective deep potting and for added efficiency in high-volume jobs.

• Electrical potting even at great depth
• Securing wires to resist strain and breakage
• Bundling wires for convenient handling
• Rigidizing components on printed circuit boards to add stability during assembly, shipping and end use
• Terminating coils
• Cable strain relief

3M manufactures Hot Melt Adhesive 3797 in PG sizes for use with the 3M Hot Melt Applicator PG II, a high-output pneumatic applicator that lets you apply up to 7.5 lbs.s. of adhesive per hour. This applicator combines with the fast adhesive open time for maximum efficiency in high-volume operations.

Hot melt adhesives/hot-glue sticks have a relatively hot melting point that ranges between approximately 250-380°F/121°C, depending on the formulation and are applied with hot-melt applicators, commonly referred to as hot-glue guns. Hot-melt glues provide a nearly instant bond between many plastics, paper and wood, but when the bond is reheated, some varieties will soften, allowing the bonded surfaces to be separated. The quick-stick nature of hot-melt adhesives speeds up operations in packaging and production.

Since 1925 when a 3M lab assistant invented masking tape, 3M has been applying science to life-developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each adhesive product like 3M Hot Melt Adhesive 3797-to help businesses like yours operate faster, better and more efficiently.

Features:

• Hot melt adhesive ideal for potting of electrical and electronic components
• Low viscosity provides high flow rates for excellent coverage
• Ball and ring tested-adhesive exhibits good temperature resistance after application
• 30 second bead open time makes for effective potting at depth
• For use with 3M Hot Melt Applicator PG II, allowing for fast-paced production

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov