null

3M 7000121382 | Fastbond 21183 55 Gallon Capacity Neutral Contact Adhesive

$86.86 $72.09
(You save $14.77)
Ships:
From Manufacturer
interval quantity:
52
Ships:
From Manufacturer
SKU:
96005880
UPC:
00021200211836
Weight:
531.82 LBS
Minimum Purchase:
52 units
Shipping:
Free Shipping

3M Fastbond Contact Adhesive 30NF is a low-odor, water-based adhesive designed to deliver a high-strength, high-coverage bond with a bonding range of 4 hours. Post-formable and high-temperature-resistant, this adhesive is non-flammable in the wet state. 3M Fastbond Contact Adhesive 30NF is proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneerand canvas.

3M Fastbond Contact Adhesive 30NF is designed to create a very strong bond resistant to high heat with a bonding range of up to four hours. It is deal for decorative laminate applications where non-flammability and low VOCs are critical. Post-formable and heat resistant, it is non-flammable in the wet state, which makes in an optimal solution in settings where fire protection is of utmost concern.

Recommended Applications
  • Most formed plastics
  • Plastic laminate
  • Wood
  • Plywood
  • Wood veneer
  • Canvas
High Immediate Strength, Long Bonding Range

Formulated to be a fast-acting solution, 3M Low Mist Contact Adhesive 30NF delivers high immediate bonding strength with a long bonding range. This design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments. With 3M Low Mist Contact Adhesive 30NF, you can leverage the advantages that come from an adhesive that is ready to meet the demands of many tough applications.

Applying Your Adhesive

Whether it is being sprayed, brushed or rolled on, the application of your 3M adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch and then proceed with the application of the additional coat.

Features:

  • For Industrial Use Only: This product is designed exclusively for industrial applications
  • Adheres a Variety of Substrates: Bonds most foamed plastics, plastic laminate, wood, plywoodand canvas
  • Tough, Resilient Bonds: Creates a high-strength, high-temperature-resistant bond
  • Long Bonding Range: Delivers up to a four-hour bonding range
  • A Variety of Application Methods: Can be applied by either spray, brush, or roller
  • Non-Flammable: Non-flammable in its wet state
 
Product Specifications
Manufacturer Part Number7000121382
Application MethodSpray
Assembly TypeLarge Surface Lamination
Color FamilyBeige
Container Size (Inch)55.0 Gallon
Container Size (mm)208.2 Liter
Environmental ConsiderationsCalifornia Air Resources Board
Flame RetardantNon-flammable
Heat Resistance<230 Degree Fahrenheit
Heat Resistance (Celsius)<110 °C
Open Time30 min - 4 hr
Physical FormThin liquid
Product ColorNeutral
Product FormBulk
Product Key30NF
Product Number30NF
Solids Weight Percent (Approximate)42.4 % - 50 %
Specific Gravity1.1
SubstrateRigid Foam (Beadboard Styrene)
Substrate 1Rigid Foam (Beadboard Styrene)
Substrate 2Flexible Foam (Latex, Urethane)
Viscosity Range (cps) at Room Temperature200-750
ApplicationBond Countertop Laminate to Particle Board , Bond Honeycomb Core to Metal

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

interval quantity:
52
Ships:
From Manufacturer