3M 7010295263 | 12.000" Diameter Mounted Buffing Wheel

Description

3M 7010295263 is a 12" diameter mounted buffing wheel to produce consistent satin finishes on most metals. This 3M mounted buffing wheel uses pleated, nonwoven abrasive flaps attached in a wave pattern to ventilate the abrasive and reduce streaking. The spring-like open web conforms to contours, responds to surface irregularities and reduces the need for chemical cleaners or wire brushes. Designed for use on bench or portable spindles, the wheel provides a repeatable satin finish on fixtures, hardware and decorative metal components.

Product Features and Benefits

Pleated nonwoven flaps for ventilated finishing

The 3M Mounted Buffing Wheel pleated design spaces the abrasive layers so air circulates to keep the wheel running cool and reduce glazing during continuous use.

Uniform satin finish with reduced streaking

Wave-like flap geometry minimises lines and streaks that can occur with stacked discs, delivering a consistent satin appearance.

Conformable open web preserves part geometry

The 3M Scotch Brite Pleated Buff Wheel has flexible fibrous layers conforming to contours for light deburring and blending while maintaining dimensional integrity of the workpiece.

Load-resistant construction for long life

Open-web design permits swarf to escape, reducing clogging and extending service life for production workflows.

Easy mounting and wide application range

This 12 inch Diameter Mounted Buffing Wheel features center-hole mounting and accepts standard spindles and the wheel is suitable for finishing faucets, hardware, trim and similar metal parts.

Frequently Asked Questions

What finish does the 3M Scotch-Brite pleated buff wheel produce?

It delivers a fine satin finish suitable for builders’ hardware, fixtures and decorative metal components.

Is this a nonwoven abrasive buffing wheel suitable for metal finishing?

Yes, the open web nonwoven construction is designed specifically for metal finishing and light deburring.

Can the 12" diameter mounted buffing wheel be used to remove minor burrs and blend welds?

Yes, it lightly deburrs and blends weld seams while preserving part geometry for final finishing.

Does the pleated design help prevent streaks compared to stacked discs?

Yes, the pleated, wave-like flaps minimise streaking and improve ventilation for more consistent satin results.

​

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov