3M 7010367390 | Scotch-Weld 805 6.76 fl oz Off-white Acrylic Adhesive

3M Scotch-Weld Acrylic Adhesive DP805 is a two-part acrylic adhesive specially formulated to bond many plastics, metals and oily metals.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M Scotch-Weld Acrylic Adhesive DP805 also bonds metals and most other plastics.

• Metalworking such as HVAC, appliance, sporting goods and specialty vehicles
• Sign manufacturing such as panel to frame bonding, trim attachment, letter bonding and frame assembly
• Bonding plastics, composites and powder coats to metal
• Typically used for larger parts where a longer open time is needed for assembly

The mix ratio for 3M Scotch-Weld Acrylic Adhesive DP805 is 1:1 for quick, precise dispensing. With an applied 3 minute work life there is some opportunity for positioning and adjustments after the adhesive is applied. This adhesive reaches handling strength in approximately 140 minutes and is fully cured in 48 hours (at 72°F/22°C).

Acrylic adhesives are two-part methyl methacrylate adhesives (MMA) that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. Acrylic glues have several features that make them easier to use, including a faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.

Features:

• Creates strong bond with minimal or no surface prep required
• Resists many chemicals, water, humidity and corrosion
• Formulated to bond multi-material assemblies such as plastics, thermoplastics, composites and metals, including oily metals
• Medium viscosity allows controlled dispensing
• 3 minute work life with 10 minute handling strength
• Strong adhesive can replace screws, rivets and welding

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov