3M 7010374033 | 250 yd x 54.000" Width x 4.0 mil Thickness Splicing & Tabbing Tape

3M double coated tape 9828 features a thin film carrier and a medium-firm acrylic adhesive that works well on many plastics and foams. 3M adhesive 340 provides good initial adhesion and holding power to a wide variety of materials including HSE plastics. The 0.5 mil polyester carrier adds dimensional stability and improved handling during slitting and die cutting operations.

• A thin, consistent alternative to glue, 3M Double Coated Tape 9828 can be used for foam, fabric and gasket attachment. This tape offers long-term temperature performance up to 120°F (49°C). A clear 0.5 mil polyester film carrier between adhesive layers adds dimensional stability to foams and other substrates and provides easier handling during slitting and die-cutting. 3M Adhesive 340 is applied to the liner side of the film at 1.5 mils and at 2.0 mils on the face side for effective wet-out. The white 55# densified kraft paper liner is compatible with rotary die-cutting.

• Double coated film tapes with 3M Adhesive 340 are ideal for applications where a combination of high initial adhesion and good shear strength for a wide variety of materials, including many plastics and foams, is required.

• General purpose foam lamination
• General purpose lamination for fabricated parts
• Gasket attachment

• Medium-firm acrylic adhesive delivers good adhesion to many plastics and foams
• 0.5 mil clear polyester (PET) film carrier adds dimensional stability and improved handling
• 55# densified kraft liner is compatible with rotary die cutting
• Adhesive on both sides supplies high initial adhesion and high tack to high surface energy (HSE) substrates

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov