714.897.1700
Chat
Email
Quotes
Quick Order
The 3M 7010512976 Cubitron II 984F belt is a high-performance abrasive designed to increase throughput on large metal components. This wide-format belt, measuring 8.0" × 107.0", provides more contact area, resulting in fewer passes and changeovers in production. Its engineered ceramic particle architecture allows for rapid cuts while maintaining a controlled surface suitable for downstream work. The belt's YF-weight polyester cloth backing resists elongation and tearing under continuous load. Closed-coat abrasive coverage concentrates grains, allowing for faster stock removal during deburring, grinding, and surface prep. The Film-Lok splice creates a smooth, high-strength joint that tracks consistently in conveyor and platen systems. Single-flex construction strikes a balance between conformity and stability, resulting in consistent contact across large surfaces and heavy parts. This 3M cubitron 80 grit solution is ideal for medium material removal with good finish control. Use the 3M cubitron 984f II ceramic belt for polishing, blending, and finishing after aggressive stock removal procedures. For high-volume metalworking environments, this belt provides repeatable performance while also lowering consumable costs per part.
Wide 8" Cutting Surface
The broad 8.0" face increases coverage per pass, so the 3M 7010512976 reduces cycle time compared with narrower 80 grit sanding disc alternatives.
Engineered Ceramic Particle Architecture
Precision ceramic grain geometry sustains sharp cutting points for rapid material removal while maintaining a consistent surface finish.
YF-Weight Polyester Cloth Backing
The 3M 7010512976 Cubitron II 984F belt has reinforced backing that resists stretch and tear under heavy loads, improving belt life in continuous grinding and deburring work.
Closed-Coat for High Abrasive Density
Dense grain application delivers aggressive cutting action and long usable life, making this belt a productive 80 grit 3M cubitron option.
Film-Lok Splice Smooth Joint Strength
The Film-Lok splice provides a low-profile, durable seam that improves tracking and reduces seam-related failures in automated lines.
| Manufacturer Part Number | 7010512976 |
| Overall Length (Inch) | 107.0" |
| Overall Length (mm) | 2717.8mm |
| Overall Width (Inch) | 8.0" |
| Overall Width (mm) | 203.2mm |
| Abrasive Material | Precision Shaped Ceramic |
| Application | Deburring, Polishing, Grinding, Surface Preparation, Finishing |
| Backing Material | Polyester Cloth |
| Backing Weight | YF Weight |
| Coat Type | Closed Coat |
| Color Family | Red |
| Flex Type | Single-Flex |
| Grit | 80+ |
| Splice Type | Film-Lok |
| Product Form | Belt |
| Product Number | 984F |
What is the 3M 7010512976 best used for?
The 3M 7010512976 is suited to heavy deburring, weld blending and surface preparation on large parts where an 80 grit sanding disc would be used.
How does this belt deliver consistent finishes?
Its engineered ceramic particle architecture and closed-coat design produce repeatable surface conditions across long runs.
Which machines are compatible with the 8" × 107" format?
This wide belt is ideal for platen grinders, conveyorized sanding lines and large manual backstands in production shops.
Can the 3M 7010512976 replace a typical 3M 80 grit sanding disc?
Yes, when a belt form factor fits the tooling, this 80 grit 3M cubitron belt offers faster cut rates and longer life than many discs.
What is 80 grit sandpaper used for?
80 grit is used for medium stock removal and smoothing after heavy grinding—roles the 3M 7010512976 performs effectively in metal prep workflows.
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
