3M 7010514704 | 984F x 80+ Grit x 120.000" OAL Precision Shaped Ceramic Cloth Belt

Description

The 3M 7010514704 is a high‑performance Cubitron II 984F ceramic belt tailored for production grinding where both removal speed and surface consistency matter. Its 80+ grit precision‑shaped ceramic grains are engineered to fracture continuously, maintaining sharp cutting edges for extended life compared with many conventional abrasives. The belt is built on a YF‑weight polyester cloth backing that resists stretch and supports stable tracking during heavy use on medium‑to‑large belt machines.
Closed‑coat abrasive placement maximizes active cutting surface, driving fast stock removal while keeping finish quality uniform across stainless steel, carbon steel and similar alloys. Film‑Lok splice technology delivers a smooth, durable joint that lowers vibration and downtime on continuous conveyorized, bench or robotic systems. Single‑flex construction helps the belt conform reliably to a variety of platen or wheel diameters, improving contact and finish repeatability. At 11.75 inches wide and 120 inches long, the belt suits higher‑throughput production platforms and larger workpieces without sacrificing control. Operators benefit from reduced heat generation, a uniform finish over belt life, and minimized risk of burning on end‑grain or sensitive areas, as noted in product details from the manufacturer channel. The combination of fast cut, durable backing, and reliable splice makes the 3M 7010514704 an efficient choice for weld blending, edge conditioning, surface preparation, deburring, polishing, and finishing in industrial settings. This belt is positioned for shops that need a dependable 3M cubitron 80 grit option capable of long runs with fewer belt changes and consistent outcomes.

Product Features and Benefits

Precision‑Shaped Ceramic Grain, 80+ Grit

Self‑sharpening ceramic grains maintain a cutting edge for longer, enabling fast stock removal with consistent finishing on tough metals.

YF‑Weight Polyester Cloth Backing

Robust backing offers dimensional stability and tear resistance, ensuring steady tracking under heavy load on production belts.

Closed‑Coat Abrasive Coverage

High-density grain placement increases material removal per pass and delivers more uniform wear than many open‑coat competitors.

Film‑Lok Splice for Smooth, Durable Joint

Strong, low‑profile splice reduces vibration and downtime, suitable for continuous automated or manual belt systems.

Single‑Flex Design with Production Dimensions

11.75" width and 120" length suit medium‑to‑large machines handling larger parts with higher throughput without sacrificing control or finish.

Frequently Asked Questions

What materials is the 3M 7010514704 best suited for?

It’s optimized for stainless steel, carbon steel and similar alloys in fabrication and finishing workflows.

Can this belt run on automated or robotic grinding systems?

Yes, the Film‑Lok splice and single‑flex construction support continuous automated operation with stable tracking and lower vibration.

How does it compare to a typical 80 grit sanding disc?

Compared to standard 80 grit sanding discs, this ceramic belt offers longer life, better heat control, faster removal, and a more consistent finish across the belt’s life.

How should I choose belt width for my equipment?

Select the 11.75" width when your platen or belt platform supports medium‑wide belts to process larger workpieces or increase throughput.

What is 80 grit sandpaper used for?

80 grit is used for moderate stock removal, shaping, weld blending and preparing surfaces for finer finishing, tasks that align well with this 3M cubitron 80 grit belt.

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov