3M 7010515613 | 984F x 36+ Grit x 160.000" OAL Precision Shaped Ceramic Cloth Belt

Description

The 3M 7010515613 is a long-reach abrasive belt designed to provide consistent material removal over long contact lengths during production finishing. At 2.75" x 160", this narrow-profile belt delivers consistent pressure and results on long components and conveyorized processes. Its engineered ceramic cutting geometry provides consistent cutting performance and wear behavior similar to a 36 grit sanding disc. The belt, made of reinforced polyester cloth, is resistant to stretch and edge distortion during high-speed cycles and heavy stock removal. A densely applied abrasive layer provides maximum cutting exposure for efficient grinding, polishing, and blending operations that do not require frequent dressing. The splice is made to have high joint strength and smooth transitions to minimize snags during continuous runs in automated cells. This 36+ grit format is ideal for carbon steel work where coarse removal and quick cycle times are required before fine finishing. The belt, which is suitable for both wet and dry use, adapts to a wide range of shop practices while helping to control dust and heat buildup. The profile will be especially useful for operators when replacing a 36 grit grinding disc or 3M 36 grit roloc disc for narrow, elongated parts. In demanding metalworking applications, choose the 3M 7010515613 for high throughput, repeatable surface condition, and long consumable life.

Product Features and Benefits

Engineered Ceramic Cutting Geometry

Advanced ceramic grain shape sustains sharpness for long intervals, giving cutting rates similar to a 3M cubitron 36 grit abrasive while improving part consistency.

Extended Narrow Profile (2.75" x 160")

The long, slender belt layout improves tracking and contact over long workpieces, reducing changeouts and keeping production moving.

Reinforced Polyester Cloth Backing

Robust backing construction resists tearing and elongation under load, increasing usable life compared with standard cloth belts in heavy deburring tasks.

High-Density Abrasive Coverage

Thick, closed abrasive layer maximizes cut per pass, so operators can replace a 36 grit grinding disc with fewer cycles and lower labor time.

Smooth, High-Strength Splice

Durable splice construction minimizes vibration and edge snags during continuous grinding, improving belt reliability in automated setups.

Frequently Asked Questions

How does the 3M 7010515613 improve productivity on long parts?

Its 160" length and stable tracking keep contact uniform across long runs, yielding fewer belt swaps versus shorter belts when doing heavy material removal.

Can this belt substitute for a 3M 36 grit roloc disc in confined fixtures?

Yes, the aggressive 36+ formulation and narrow profile make it an effective alternative when disc access is limited.

Is the 3M 7010515613 only suitable for carbon steel?

While optimized for carbon steel, the belt’s ceramic cutting geometry also performs well on similar ferrous substrates and many fabrication alloys.

How does the belt manage heat during continuous grinding?

Dense abrasive layout and the backing design help disperse heat and reduce glazing, allowing longer runs with less thermal impact on parts.

What simple steps extend the service life of this 36 grit sanding disc alternative?

Use correct belt tension, keep contact pressures consistent, and employ intermittent wetting where appropriate to reduce glazing and maximize life.

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov