3M 7010536339 | 984F x 36+ Grit x 168.000" OAL Precision Shaped Ceramic Cloth Belt

Description

The 3M 7010536339 is a high-capacity 984F Cubitron II ceramic cloth belt made for heavy-duty metal removal and production finishing. At 168.0" overall length and 2.0" width, this 36+ grit belt delivers aggressive cut rates while enabling controlled surface profiles across panels and weld seams. Precision-shaped ceramic grains provide continual self-sharpening action, increasing throughput and reducing the need for frequent belt changes. Constructed on a YF-weight polyester cloth backing, the 3M 7010536339 resists stretch and tracking issues during long runs in conveyor-fed or manual belt systems. Closed-coat abrasive layout concentrates cutting power for consistent life and predictable wear when compared with conventional 36 grit sanding disc solutions. A Film-Lok splice gives a smooth, dependable joint suitable for continuous operation in automated finishing cells and heavy-duty shop applications. This 3M cubitron 984F II ceramic belt is ideal for grinding, deburring, surface preparation, polishing and edge blending on stainless and carbon steels. The red color family and robust construction make the belt easy to identify and integrate into organised production inventories. Users report improved cycle times and reduced rework when replacing traditional 36 grit grinding disc approaches with this high-performance belt. Overall, the 3M 7010536339 delivers the cutting speed, durability and repeatability required for demanding fabrication and finishing work.

Product Features and Benefits

Precision Shaped Ceramic Grain

The 3M 7010536339 uses precision-shaped ceramic abrasives for fast, consistent cutting, outperforming standard 36 grit sanding disc products in metal removal.

36+ Grit for Aggressive Stock Removal

36+ grit specification delivers heavy material removal and rapid profiling while still providing a controllable finish when using the 3M cubitron 36 grit formulation.

168" Length × 2" Width YF-Weight Backing

Long 168.0" OAL and sturdy polyester backing provide dimensional stability and reliable tracking for continuous production with the 3M 984F belt.

Closed-Coat Coverage with Film-Lok Splice

High abrasive coverage and a Film-Lok splice ensure smooth transitions and extended life compared to traditional 36 grit grinding disc workflows.

Single-Flex Conformability

Single-flex design allows the 3M 7010536339 to conform to flat and slightly contoured surfaces while maintaining cutting efficiency typical of the 3M cubitron 984F II ceramic belt.

Frequently Asked Questions

What is 36 grit sandpaper used for?

The 36-grit sandpaper and the 3M 7010536339 36+ grit belt are used for heavy stock removal, rapid shaping, weld blending and initial surface preparation before finer finishing.

What materials does the 3M 7010536339 work best on?

The 3M 7010536339 Cubitron II ceramic belt excels on stainless steel, carbon steel and tough alloys for grinding, deburring and surface prep.

How does this belt compare to a 36 grit grinding disc?

The 3M 984F often outlasts a 36 grit grinding disc by offering better conformability, lower heat transfer and longer usable life in continuous operations.

Is the Film-Lok splice suitable for automated lines?

Yes, the Film-Lok splice on the 3M 7010536339 provides a smooth, robust joint designed for reliable performance in automated finishing systems.

Which backing and flex type does this belt use?

The 3M 7010536339 features a YF-weight polyester cloth backing with single-flex construction to deliver stability and accurate tracking during heavy grinding tasks.

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov