3M 7100084534 | Scotch-Weld 8405NS 55 Gallon Green Acrylic Adhesive

3M Scotch-Weld Acrylic Adhesive DP8405NS is a non-sag, tough, two-part acrylic adhesive. This toughened product provides improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

3M Scotch-Weld Acrylic Adhesive DP8405NS is a non-sag acrylic adhesive with a 10:1 mix ratio. It features a 5 minute work life to allow time to position substrates prior to adhesion. This working life, open time and cure length can be accelerated with heat. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 19 minutes, increasing throughput and productivity while featuring a high peel and impact performance.

• Metalworking such as HVAC, appliance, sporting goods and specialty vehicles
• Sign manufacturing such as panel to frame bonding, trim attachment, letter bonding and frame assembly
• Bonding plastics, composites and powder coats to metal
• Typically used where fast assembly of smaller parts is required

3M Scotch-Weld Acrylic Adhesive DP8405NS Green has been recognized by Underwriters Laboratories (UL) for use in electrical equipment and electric signs. Please review UL File QOQW2. MH17478 and Sign Components Manual (SAM) File E464624 for details.

3M Scotch-Weld Acrylic Adhesive DP8405NS Green should yield similar results as 3M Scotch-Weld Acrylic Adhesive DP8410NS Green, which has been tested for surface flammability, smoke, toxic gas generation and caloric content per ASTM E162, ASTM E662, ASTM E1354, Bombardier SMP 800-Cand Boeing BSS 7239 test methods.

With non-sag properties you're assured the adhesive is applied exactly where you want it and won't migrate during the application or bonding processes. 3M Scotch-Weld Acrylic Adhesive DP8405NS bonds well to many materials, including most plastics, metals and oily surfaces. The bond created with this adhesive is durable and features excellent shear strength and impact resistance. And the 18-month room temperature shelf life of the product simplifies inventory management.

Acrylic adhesives are two-part methyl methacrylate adhesives (MMA) that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. Acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.

Features:

• 5 minute work life with 20 minutes to structural strength
• Durable bond with excellent shear, peel and high impact strength
• Bonds to a variety of surfaces, including most metals and plastics
• High strength with minimal surface prep
• Features spacer beads to control bond line thickness

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov