Carr Lane CLM-8-LPB | 8mm Diameter Locking-Pin Bushing

Locking-Pin Bushings

Equipped with a retainer spring clip on the inside diameter, for use with all types of locking/captive pins and locating screws. These precision bushings are designed to press fit in a standard reamed hole, and can be secured with a Lockscrew to positively hold the bushing in place. Made in USA.

Version with Oversize ID

Each bushing diameter is optionally available with an oversize ID (.040" larger), for applications with multiple pins where additional clearance is desired to prevent binding.

Replacement Spring Clips

Every Locking-Pin Bushing includes a spring clip, to retain its captive L Pin, T Pin, or Clamping Pin. To remove the pin from the bushing, the spring clip must first be removed.

Material

Parts Specification

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov