Features
- The 3833 AlumaMill G3 is a 3-flute, high performance end mill designed for roughing and finishing aluminum and non-ferrous materials
- It excels in aggressive plunging and ramping speed environments and was designed for fast material removal and multi-purpose machining
- Its flute shape and relief form generates superior wall finishes, while its unique wiper geometry produces excellent floor finishes
- The 3833 AlumMill G3 is stocked uncoated and with FC-5 coating
Product Specifications
Cutting Diameter (Decimal Inch) | 0.3750" |
Cutting Diameter (mm) | 9.53mm |
Cutting Diameter (Inch) | 3/8" |
Cutting Flute Length (Decimal Inch) | 0.5000" |
Cutting Flute Length (mm) | 12.70mm |
Cutting Flute Length (Inch) | 1/2" |
Shank Diameter (Decimal Inch) | 0.3750" |
Shank Diameter (mm) | 9.53mm |
Shank Diameter (Inch) | 3/8" |
Overall Length (Decimal Inch) | 2.5000" |
Overall Length (mm) | 63.50mm |
Overall Length (Inch) | 2-1/2" |
Coating/Finish | Uncoated |
Metric/Inch | Inch |
Number of Flutes | 3 |
Helix Angle (Degrees) | 37.5 |
Flute Spiral Direction | Right Hand |
Direction of Cut | Right Hand |
Point End Type | Square |
End Type Character Designation | S |
End Type | Single End |
Coolant Through | Non Coolant Through |
Weldon Flat | No |
Length | Stub |
Length Designator | STB |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
Fullerton Tool
Mill Diameter (Inch):
3/8"
Number of Flutes:
3
Length of Cut (Inch):
1/2"
Length of Cut (Decimal Inch):
0.5000"
Length of Cut (mm):
12.70mm
Shank Diameter (inch):
3/8"
Shank Diameter (Decimal Inch):
0.3750"
Shank Diameter (mm):
9.53mm
Material:
Solid Carbide
Finish/Coating:
Uncoated
Single or Double End:
Single
Cutting Direction:
Right Hand
Flute Direction:
Right Hand
Center Cutting:
Yes
Series:
3833 AlumaMill G3
Ships:
From Partner Facility