null

Fullerton Tool 36091 | 90-degree 3/8" x 2-1/2" Solid Carbide TiAlN Chamfer Mill

$36.50 $35.77
(You save $0.73)
Ships:
From Partner Facility
Brand:
Fullerton Tool
Cutter Head Diameter (Inch):
3/8"
Cutter Head Diameter (Decimal Inch):
0.3750"
Cutter Head Diameter (mm):
9.53mm
Included Angle:
90 Degree
Material:
Solid Carbide
Finish/Coating:
TiAlN
Overall Length (Inch):
2-1/2"
Overall Length (mm):
63.50mm
Shank Diameter (Inch):
3/8"
Shank Diameter (Decimal Inch):
0.3750"
Number of Flutes:
2
End Type:
Single End
Ships:
From Partner Facility
interval quantity:
1
SKU:
10002203
UPC:
Weight:
0.05 LBS
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
Fullerton Tool 36091 | 90-degree 3/8" x 2-1/2" Solid Carbide TiAlN Chamfer Mill

Related Products

Features

  • The 3730 Chamfer Mill is a general performance end mill available with 2 or 4-flutes
  • It was designed for deburring and chamfering in small grooves and holes
  • It improves tool life and finish for profiling and chamfering of large features
  • The 3730 Chamfer Mill is stocked uncoated and with TiAlN coating

Product Specifications
Cutting Diameter (Decimal Inch) 0.3750"
Cutting Diameter (mm) 9.53mm
Cutting Diameter (Inch) 3/8"
Cutting Flute Length (Decimal Inch) 0.1870"
Cutting Flute Length (mm) 4.75mm
Shank Diameter (Decimal Inch) 0.3750"
Shank Diameter (mm) 9.53mm
Shank Diameter (Inch) 3/8"
Overall Length (Decimal Inch) 2.5000"
Overall Length (mm) 63.50mm
Overall Length (Inch) 2-1/2"
Non Cutting Tip (Decimal Inch) 0.0300"
Non Cutting Tip (mm) 0.76mm
Coating/Finish TIALN
Metric/Inch Inch
Number of Flutes 2
Flute Spiral Direction Straight
Direction of Cut Right Hand
Point End Type Chamfer
End Type Character Designation C
Chamfer Angle (Degrees) 90
End Type Single End
Coolant Through Non Coolant Through
Weldon Flat No
Length Standard
Length Designator SD

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

Brand:
Fullerton Tool
Cutter Head Diameter (Inch):
3/8"
Cutter Head Diameter (Decimal Inch):
0.3750"
Cutter Head Diameter (mm):
9.53mm
Included Angle:
90 Degree
Material:
Solid Carbide
Finish/Coating:
TiAlN
Overall Length (Inch):
2-1/2"
Overall Length (mm):
63.50mm
Shank Diameter (Inch):
3/8"
Shank Diameter (Decimal Inch):
0.3750"
Number of Flutes:
2
End Type:
Single End
Ships:
From Partner Facility
interval quantity:
1