Mitee-Bite 32075 | 10-32 Screw Size x 4.5 ft-lb Max Torque x 3/4" Vise Jaw Grip - 2 Pack

Description

The Mitee-Bite 32075 TalonGrip is a precision-engineered low-profile vise jaw grip system made to deliver secure, reliable workholding for small stock and precision workpieces in standard and fixture vise setups used across CNC machining, manual milling, and toolmaking environments. As a 10-32 screw 3/4″ vise jaw grip 2-pack, the Mitee-Bite 32075 provides machinists with an efficient, repeatable clamping solution that maximizes the exposed workpiece surface for machining while maintaining a positive, slip-resistant grip on the material being held. The TalonGrip 3/4″ fixture vise grips are made to engage workpiece stock through a serrated gripping face that bites into the material surface upon tightening, ensuring the part remains firmly secured against lateral and axial cutting forces during machining without requiring excessive clamping torque. With a maximum torque rating of 4.5 ft/lb, these mitee bite vise jaws are suitable for delicate and precision workholding applications where over-clamping could deform, mar, or damage sensitive workpiece surfaces or tight-tolerance pre-machined features. The mitee bite talon grip design allows operators to achieve maximum holding security within a low-profile jaw height, enabling the cutting tool to approach the workpiece much closer to the vise jaw face than conventional jaw designs would permit, opening up machining access that would otherwise be inaccessible. The 3/4″ TalonGrip fixture grip for standard vises mounts using a 10-32 screw thread, providing straightforward, tool-accessible installation into compatible vise jaw slots without requiring custom fixturing hardware or specialized machining of the jaw body. The vise grip jaws with 10-32 mounting thread are delivered as a 2-piece pack, supplying both the left and right grip needed to outfit a complete vise jaw face with TalonGrip clamping capability in a single purchase. As clamping grips for small stock workholding, the Mitee-Bite 32075 is particularly effective for gripping round bar, hex stock, square bar, and small plate sections that are difficult to secure with conventional flat vise jaws due to insufficient contact surface area. The mitee bite vise jaws are manufactured from hardened steel to ensure long-term resistance to wear on the serrated gripping face, maintaining consistent grip performance across extended production runs and high-cycle workholding applications. The TalonGrip 3/4″ fixture vise grips integrate naturally into existing vise setups without requiring vise body modifications, making the 32075 a cost-effective workholding upgrade that delivers immediate performance improvement. The clamping grips for small stock workholding offered by the Mitee-Bite 32075 reduce setup time by providing a consistently reliable grip that holds part position from the first piece to the last in any production run, reducing the frequency of part repositioning or reclamping due to workholding slips. The mitee bite talon grip's serrated engagement pattern distributes clamping force across multiple contact points on the workpiece face, reducing stress concentration compared to smooth jaw designs and minimizing the risk of workpiece deformation under cutting loads. For machinists who regularly hold small, short, or thin-walled workpieces in standard vises, the 3/4″ TalonGrip fixture grip for standard vises provides the grip security of dedicated fixturing at a fraction of the cost and setup time. The vise grip jaws with a 10-32 mounting thread are an ideal workholding upgrade for prototype shops, tool rooms, and production machining environments where versatility, speed, and workholding consistency are equally important operational priorities. Choose the Mitee-Bite 32075 TalonGrip for dependable, low-profile, precision workholding that secures small stock confidently and consistently across every machining application.

Product Features and Benefits

Serrated TalonGrip Face For Positive Workpiece Engagement

The mitee bite talon grip serrated jaw face bites directly into the workpiece upon tightening, providing secure, slip-resistant clamping without requiring excessive torque on small or delicate stakes.

Low-Profile Design For Maximum Machining Access

The TalonGrip 3/4″ fixture vise grips' low-profile height allows cutting tools to approach much closer to the jaw face than conventional designs, maximizing the machinable area of held workpieces.

4.5 ft/lb Maximum Torque For Precision Workholding

Rated to 4.5 ft/lb maximum torque, these mitee bite vise jaws deliver controlled, reliable clamping force that secures sensitive workpieces without the risk of deformation or surface damage.

10-32 Screw Mounting For Standard Vise Compatibility

The vise grip jaws with a 10-32 mounting thread install directly into compatible vise jaw slots, making the 10-32 screw 3/4″ vise jaw grip 2-pack a straightforward, no-modification upgrade for standard vise setups.

2-Pack Provides Complete Left And Right Jaw Coverage

The Mitee-Bite 32075 ships as clamping grips for small stock workholding in a 2-piece pack, delivering both the left and right grips needed to fully equip a standard vise jaw face in one purchase.

Frequently Asked Questions

What screw size mounts the Mitee-Bite 32075 TalonGrip 3/4″ vise jaw grip?

The Mitee-Bite 32075 uses a 10-32 screw thread for mounting, allowing these vise grip jaws with a 10-32 mounting thread to install directly into compatible standard vise jaw slots without modification.

What is the maximum torque rating for the Mitee-Bite 32075 mitee bite vise jaws?

The TalonGrip 3/4″ fixture vise grips are rated to a maximum torque of 4.5 ft/lb, providing controlled clamping force suitable for precision and delicate workpiece workholding applications.

How many pieces are included in the Mitee-Bite 32075 10-32 screw 3/4″ vise jaw grip 2-pack?

The Mitee-Bite 32075 includes 2 pieces one left and one right TalonGrip grip, providing complete clamping coverage as clamping grips for small stock workholding on a standard vise jaw face.

What types of stock are the mitee bite talon grip jaws best suited for?

The 3/4″ TalonGrip fixture grip for standard vises is ideal for gripping round bars, hex stock, square bars, and small plate sections that are difficult to hold securely with conventional flat vise jaws.

Are the Mitee-Bite 32075 mitee bite vise jaws compatible with standard vises?

Yes, the vise grip jaws with a 10-32 mounting thread install into compatible standard vise jaw slots without requiring body modifications, making the mitee bite talon grip a direct drop-in workholding upgrade.

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov