Roemheld CLR-60-H | 1/4" ID x 60" OAL Heavy-Duty Hose

Heavy-Duty Hoses 37-Degree Flare

Heavy-Duty Hose is ideal for long, flexible hydraulic connections, such as the line from a power source to a fixture. This high-pressure hose is reinforced with four plies of high-tensile wire for remarkably little expansion under pressure (fluid required due to expansion is only 0.066 cu.in. per foot at 7500 psi). 1/4" inside diameter 0. 5" minimum bend radius. 28,000 psi minimum burst pressure provides a safety factor over 3-to-1 at 7250 psi.The version has swivel-nut ends for 37°-flare fittings.

Design Considerations & Safety Precautions

Do not use any type of hose other than the Heavy-Duty Hose or Fixture Hose with the power workholding products.

Parts Specification

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov