714.897.1700
Chat
Email
844.548.0100
Quotes
Quick Order
Features:
- An ideal balance of helix, indexing, flute depth, rake and relief
- Variable indexing for chatter supression and patented edge geometry for shearing and strength
- Chatter-free geometry allows deep cutting and high speed machining
- Enhanced corner geometry with tight tolerance corner radii
- Excels at roughing, ramping, high speed machining and finishing in a variety of materials
Product Specifications
| Manufacturer Part Number | 47633 |
| Cutting Diameter (Decimal Inch) | 0.984" |
| Cutting Diameter (mm) | 25.00mm |
| Shank Diameter (Decimal Inch) | 0.984" |
| Shank Diameter (mm) | 25.00mm |
| Length of Cut (Decimal Inch) | 2.953" |
| Length of Cut (mm) | 75.00mm |
| Overall Length (Decimal Inch) | 6.693" |
| Overall Length (mm) | 170.00mm |
| Corner Radius (Decimal Inch) | 0.197" |
| Corner Radius (mm) | 5.00mm |
| Shank Diameter Tolerance | h6 |
| Flute Type | Spiral |
| Number of Flutes | 5 |
| Center Cutting | No |
| Chip Breaker | Yes |
| High Performance | Yes |
| Coating | AlTiN (Ti-NAMITE-A) |
| Product Type | Chip Breaker Corner Radius End Mill |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov
Brand:
SGS
Cutting Diameter (Inch):
61/62"
Cutting Diameter (Decimal Inch):
0.9840"
Cutting Diameter (mm):
25.00mm
Shank Diameter (Inch):
61/62"
Shank Diameter (Decimal Inch):
0.9840"
Shank Diameter (mm):
25.00mm
Overall Length (Inch):
6-9/13"
Overall Length (Decimal Inch):
6.6930"
Overall Length (mm):
170.00mm
Length of Cut (Inch):
2-81/85"
Length of Cut (Decimal Inch):
2.9530"
Length of Cut (mm):
75.00mm
Corner Radius (Inch):
13/66"
Corner Radius (Decimal Inch):
0.1970"
Corner Radius (mm):
5.00mm
Finish/Coating:
AlTiN (Ti-NAMITE-A)
Number of Flute:
5
interval quantity:
1
