Product Specifications
EDP Number | EM902905 |
Diameter (Decimal Inch) | 0.1200" |
Diameter (Inch) | 2/17" |
Diameter (mm) | 3.00mm |
Shank Diameter (Decimal Inch) | 0.2362" |
Shank Diameter (Inch) | 13/55" |
Shank Diameter (mm) | 6.00mm |
Length of Cut (Decimal Inch) | 0.2362" |
Length of Cut (Inch) | 13/55" |
Length of Cut (mm) | 6.00mm |
Length Below Shank (Decimal Inch) | 2.0472" |
Length Below Shank (Inch) | 2-1/21" |
Length Below Shank (mm) | 52.00mm |
Overall Length (Decimal Inch) | 3.5433" |
Overall Length (mm) | 90.00mm |
Ball Nose Radius (Decimal Inch) | 0.0591" |
Ball Nose Radius (Inch) | 1/17" |
Overall Length (Inch) | 3-25/46" |
Neck Diameter (Decimal Inch) | 0.2087" |
Ball Nose Radius (mm) | 1.50mm |
Neck Diameter (Inch) | 5/24" |
Neck Diameter (mm) | 5.30mm |
Under Neck Parallel (Decimal Inch) | 0.3150" |
Under Neck Parallel (Inch) | 23/73" |
Under Neck Parallel (mm) | 8.00mm |
Number of Flutes | 2 |
Neck Taper Angle (Degree) | 1 Degree 30' |
Series | EM902 |
Helix Angle (Degree) | 30 Degree |
Shank Style | Plain |
Coating | ALTiN |
Cut Type | Center Cut |
Material | Carbide |
Cutting Direction | Right |
Application | P |
Produce Type | Taper Neck Ball Nose End Mill |
Warning:
This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.
For more information, visit www.P65Warnings.ca.gov