null

3M 7010495884 | 1.250" Center Hole Diameter x 4.000" Overall Diameter x 0.250" Thickness x 675PM Wheel Type 1V1 Polyimide Hybrid Bond Diamond Wheel

$478.03
Ships:
From Manufacturer
interval quantity:
1
Ships:
From Manufacturer
SKU:
45049837
UPC:
638060001691
Weight:
0.12 LBS
Minimum Purchase:
1 unit
Shipping:
Free Shipping

3M diamond wheel 675PM are used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best form retention and a long wheel life at lower cut rates. It can be used with either oil or water based lubricants.

High Performance Grinding
  • Polyimide diamond wheels are designed for high performance grinding on carbide. The 3M diamond wheel 675PM line is specifically designed for the production and sharpening of cutting tools, including end work, gashing and cutting primary and secondary relief edges. Primary relief involves removing material directly behind the cutting edge to enhance chip clearance. For secondary relief, a slight bevel is ground next to the primary relief. End work grinds a small relief angle on the tip of the tool, while gashing adds a slot along the cutting face to allow for chip flow. Each of these processes require the highest level of quality that the 3M diamond wheel 675PM provides.
Heat Resistant Bonding
  • These superabrasive wheels also use a polyimide resin bonding and are specially designed to resist thermal and chemical deterioration, which can occur during high speed grinding. This S rated bond is very hard and excellent for precision work on softer tool metals like carbide. This also allows for longer run times and longer over-all wheel life. Used in wet grinding applications with high volume flood coolant systems, this bonding material can be used with wither water or oil based lubricants for greater flexibility. 3M provides a broad portfolio of superabrasive wheels used for your round tool relief and clearance angle applications. The 3M diamond wheel 675PM line features a variety of metal cores, including aluminum, steel, composite and copper, and can be cut with custom arbor holes to fit customer specifications. From short runs and re-sharpening to "lights-out" and long production runs, 3M has the wheel design to meet your needs.

Features:

  • Diamond abrasive capable of cutting or shaping cemented carbide, ferrites and ceramics
  • Polyimide bonding resists thermal and chemical deterioration
  • Designed to provide the best form retention and longest wheel life
  • Various wheel designs are available for gashing, primary and secondary relief and end work
  • Arbor holes are made to customer specifications
 
Product Specifications
Manufacturer Part Number7010495884
Legacy SKU65500401610
Abrasive MaterialDiamond
Center Hole Diameter (Inch)1.25"
Center Hole Diameter (mm)31.75mm
Overall Diameter (Inch)4.0"
Overall Diameter (mm)101.6mm
Overall Thickness (Inch)0.25"
Overall Thickness (mm)6.35mm
Product FormWheel
Product Number675PM
Wheel Type1V1

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov

interval quantity:
1
Ships:
From Manufacturer