3M 7010513382 | 984F x 80+ Grit x 346.000" OAL Precision Shaped Ceramic Cloth Belt

Description

The 3M 7010513382 Cubitron II 984F belt is engineered for continuous production environments that demand fast, repeatable material removal and consistent surface quality.
This 3m cubitron 984f ii ceramic belt employs precision-shaped ceramic grains in an 80+ grit formulation to sustain cutting action and reduce dressing frequency.
A robust YF-weight polyester cloth backing delivers dimensional stability and reliable tracking across long 346.0" OAL runs on platen and conveyor systems.
Closed-coat abrasive placement increases active cutting area to speed cycle times while producing uniform finishes for downstream operations.
Film-Lok splice technology provides a low-profile, high-strength joint that minimizes vibration and splice failures in continuous production use.
Single-flex construction allows the belt to conform to a wide range of platen diameters, improving contact and finish repeatability on large parts.
At 3.0" (76.2 mm) width and 346.0" (8788.4 mm) length, this belt is sized for high-capacity machines and heavy throughput applications.
Applications include grinding, deburring, polishing, weld blending and surface preparation where a 3m cubitron 80 grit solution is preferred over conventional discs.
Operators will notice improved heat management, extended belt life and fewer belt changes compared with standard 80 grit sanding disc alternatives.
For fabricators seeking a production-grade 3M 7010513382 belt, this 984F product balances aggressive cut, controlled finish and long service life.

Product Features and Benefits

Precision-Shaped Ceramic — 80+ Grit

Precision grains on the 3M 7010513382 keep the 80+ grit belt cutting sharp for extended life and consistent finishing compared with standard 80 grit sanding discs.

YF-Weight Polyester Backing

Durable backing stabilizes the long 346.0" OAL belt for predictable tracking and reduced stretch during high-throughput grinding.

Closed-Coat High Coverage

Dense abrasive placement increases material removal per pass and lowers loading, making this 3m cubitron 984f ii ceramic belt highly efficient.

Film-Lok Splice for Continuous Use

Film-Lok splice technology creates a smooth, strong joint that reduces vibration and downtime on conveyorized and platen machines.

Production-Sized Dimensions

3.0" width and 346.0" length support larger parts and long runs, enabling fewer belt changes and higher overall equipment effectiveness.

Frequently Asked Questions

What machines are compatible with the 3M 7010513382 belt?

The 3M 7010513382 fits wide platen machines, conveyorized finishing systems and production backstands that accept a 3.0" x 346.0" belt.

How does this belt compare to a 3m 80 grit sanding disc?

Compared with a 3m 80 grit sanding disc, this 3m cubitron 984f ii ceramic belt provides longer life, improved heat control and higher material removal in production runs.

Can the Film-Lok splice withstand continuous automated operation?

Yes — the Film-Lok splice on the 3M 7010513382 is engineered for durable, low-profile joints that maintain smooth tracking on automated lines.

How should I choose this belt for larger parts?

Choose the 3.0" width and 346.0" OAL when your platen or conveyor accommodates production-length belts and you need fewer belt changes for large workpieces.

what is 80 grit sandpaper used for?

80 grit sandpaper is used for moderate stock removal, shaping, weld blending and preparing surfaces for finer finishing — tasks well suited to this 3m cubitron 80 grit belt.

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov