3M 7010513444 | 984F x 60+ Grit x 18.000" OAL Precision Shaped Ceramic Cloth Belt

Description

The 3M 7010513444 Cubitron II 984F ceramic belt is a 3.00" × 18.0" single-flex abrasive made for efficient surface preparation and finishing in tight work spaces. Precision-shaped ceramic grain provides aggressive but controlled cutting performance ideal for grinding, deburring, and polishing. With a YF-weight polyester cloth backing and a closed-coat construction, this belt provides consistent cut rates and excellent tear resistance throughout its lifespan. The 60+ grit formulation strikes a balance between material removal and surface refinement, making the 3M 7010513444 an excellent substitute for a 60-grit sanding disc. The Fabri-Lok splice is a low-profile, rugged joint that improves tracking and decreases seam-related downtime during repeated runs. The single-flex design conforms to contours and edges, allowing for precise finishing on metal components and complex geometries. The 3M cubitron 984F ii ceramic belt is made to limit glazing while maintaining sharpness, allowing for fewer belt changes and higher productivity. Use it for medium-to-heavy stock removal; a 60 grit grinding wheel would suffice, but a belt provides better control and surface consistency. The 3M 984F belt is ideal for production bench sanders and manual backstand workflows in which dependability is critical. This 3M 7010513444 belt provides faster material removal, repeatable finishes, and the long life expected of 3M cubitron ceramic belt technology.

Product Features and Benefits

Improved Heat Evacuation

Precision-shaped ceramic grain and closed-coat layup help reduce heat buildup during heavy cuts, protecting workpiece finish when replacing a 60 grit sanding disc.

Predictable Finish Repeatability

Consistent grain distribution on the 3M 7010513444 ensures the same surface profile pass-to-pass for reliable finishing with the 3M cubitron ceramic belt.

Operator-Friendly Handling

The 3.00" × 18.0" size and single-flex make belt changes and hand-guided work easier, improving cycle times versus swapping an abrasive flap wheel 60 grit.

Lower Overall Cost per Part

The Longer life and sustained cut rate mean fewer belt changes and lower consumable spending compared with a standard 60 grit grinding wheel.

Enhanced Edge Control

The YF-weight polyester backing and Fabri-Lok splice provide stable tracking for precise edge work and contouring during deburring and shaping tasks.

Frequently Asked Questions

Can this belt be used for heavy edge breaking?

Yes, the 3M 7010513444 delivers an aggressive cut and stable tracking suitable for edge breaking on metal parts.

Will using this belt reduce the number of changeovers compared to flap wheel 60 grit?

Typically yes, the belt’s extended life and consistent cut reduce changeovers versus frequently replaced flap wheels.

Is special storage required to keep this 3M cubitron ceramic belt in top condition?

Store flat or hung in a cool, dry area away from UV and high humidity to preserve backing integrity and performance.

How does this belt perform versus a 60 grit grinding wheel on thin sections?

The belt produces less localized heat and better control, making it preferable on thin sections where a 60 grit grinding wheel may overheat or remove too much material.

Are there advantages to using this belt instead of standard 60 grit sanding disc products?

Yes, it offers improved life, repeatable finishes, and better material removal efficiency, lowering overall finishing costs and downtime.

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov