The 3M 7010513720 Cubitron II 984F 36+ grit belt is purpose-built for aggressive stock removal and controlled finishes in industrial metalworking. Precision Shaped Ceramic grains sustain cutting performance by fracturing predictably, giving the 3M cubitron 984F II ceramic belt extended life and repeatable results. At 103.0" overall length and an expansive 52.0" width, the belt provides long runtimes and broad contact for heavy-duty surface preparation. YF-weight polyester cloth backing delivers dimensional stability and tear resistance for continuous grinding, polishing and deburring cycles. Closed-coat abrasive construction maximizes grain coverage for efficient removal, ideal where a 36 grit sanding disc or 36 grit grinding disc would be required. Film-Lok splice technology supplies a low-profile, dependable joint to reduce splice-related downtime in production environments. Single-flex design allows the 3M 984F to perform reliably on belt-driven equipment used for surface preparation and finishing. This maroon 984F belt is effective on stainless steel substrates and other alloys where fast cutting and predictable finishing are required. Operators benefit from lower glazing, reduced rework and higher throughput when replacing conventional abrasives with 3M cubitron 36 grit belts. Specify the 3M 7010513720 for polishing, finishing, grinding and deburring where shop-floor productivity and consistency are priorities.
Precision Shaped Ceramic Grain Technology
Controlled fracturing keeps edges sharp for rapid stock removal and core performance of the 3M 7010513720 and the cubitron 984F II ceramic belt.
Large 103" OAL × 52" Width Form Factor
Extended dimensions provide longer service life and consistent contact area for heavy surface preparation compared with narrow belts.
Durable YF-Weight Polyester Cloth Backing
Robust backing resists tearing and maintains tracking during intensive grinding, polishing and deburring cycles.
Closed-Coat Coverage with Film-Lok Splice
High abrasive density plus a low-profile Film-Lok splice improve cut uniformity and reduce downtime versus standard splice types.
Optimised for Coarse Metalwork (36+ Grit)
36+ grit formulation delivers aggressive shaping and fast stock removal where a 36 grit sanding disc or 36 grit grinding disc is typically used.
| Manufacturer Part Number | 7010513720 |
| Overall Length (Inch) | 103.0" |
| Overall Length (mm) | 2616.2mm |
| Overall Width (Inch) | 52.0" |
| Overall Width (mm) | 1320.8mm |
| Abrasive Material | Precision Shaped Ceramic |
| Application | Polishing, Surface Preparation, Finishing, Deburring, Grinding |
| Backing Material | Polyester Cloth |
| Backing Weight | YF Weight |
| Coat Type | Closed Coat |
| Color Family | Red |
| Flex Type | Single-Flex |
| Grit | 36+ |
| Splice Type | Film-Lok |
| Product Form | Belt |
| Product Number | 984F |
What applications suit the 3M 7010513720 belt?
Ideal for heavy surface preparation, polishing, finishing, grinding and deburring on stainless steel and similar alloys using the cubitron 984F II ceramic belt.
Which machines can handle the 103" × 52" 3M 7010513720 belt?
The belt is intended for robust belt-driven systems and industrial finishing lines where wide, long OAL belts are supported for continuous operations.
How does the Film-Lok splice improve run reliability?
Film-Lok creates a strong, low-profile joint that reduces splice failures and improves uptime in high-demand finishing processes.
Is this product comparable to a 36 grit sanding disc or a 36 grit grinding disc?
Yes, the 36+ grit 3M 7010513720 offers comparable aggressive cutting and shaping capability to 36 grit sanding discs and grinding discs with longer service intervals.
What is 36-grit sandpaper used for?
The 36-grit sandpaper is used for aggressive material removal, initial shaping, heavy deburring and fast stock removal on metals.
714.897.1700
Chat
Email
Quotes
Quick Order
