3M 7010534682 | 984F x 80+ Grit x 4.719" OAL Precision Shaped Ceramic Cloth Belt

Description

The 3M 7010534682 Cubitron II 984F ceramic belt is a compact, high‑performance abrasive for metalworking. With a 5/8 “ width and 4.719” overall length, it’s built for tight tooling envelopes and small belt systems. The belt uses precision‑shaped ceramic grains rated at 80+ grit, giving a strong balance of aggressive cutting and controlled finish. YF‑weight polyester cloth backing supports durability and stability under medium to high pressure use, reducing belt stress. Closed‑coat construction ensures broad abrasive coverage, helping maintain cut rate and finish uniformity over the belt’s life. Lap unskived splice provides a smooth, dependable joint that minimizes snags and downtime in continuous use. Single‑flex design lets the belt conform to tool angles and small radii without sacrificing tracking or stability. This belt is an excellent alternative when traditional 80 grit sanding discs are too coarse or too bulky for the job. Ideal for finishing, grinding, polishing, surface preparation and deburring, especially on stainless and other tough alloys. Use the 3M Cubitron 984F ceramic belt to shorten cycle times, extend belt life, and maintain a professional finish in compact setups.

Product Features and Benefits

Precision‑Shaped Ceramic Abrasive

The ceramic grains fracture to continually form sharp edges, sustaining fast cutting, exactly what 3M 7010534682 provides over many conventional belts.

80+ Grit for balanced cut and finish

Delivers more aggressive removal than finer grades yet cleaner results than very coarse belts, a practical choice for shops using 80 grit sanding disc alternatives.

YF‑Weight Polyester Cloth Backing

Stable, durable backing supports repeated use under pressure, keeping the 4.719” belt tracking correctly across demanding grinding or finishing tasks.

Lap Unskived Splice

Strong, low‑profile joint reduces the risk of catching or tearing during continuous runs, improving overall workflow reliability.

Single‑Flex narrow profile

Compact 5/8 “ width adapts to small, precise tools and close‑quarter work, letting users reach tight areas without oversizing the abrasive.

Frequently Asked Questions

What exact size is the 3M 7010534682 belt?

It is 5/8 “ wide and 4.719” long, built as a narrow, short belt for precise tool use.

What metalworking tasks suit this belt?

Finishing, grinding, polishing, surface preparation, and deburring, especially where a compact, professional abrasive is needed.

How does it compare to an 80 grit sanding disc?

This belt offers a similar or better balance of cutting speed and finish control in small tools, avoiding the bulk of standard discs while maintaining a strong cut.

What backing and splice types does it use?

YF‑weight polyester cloth backing for strength plus a lap unskived splice for a smooth, durable joint in continuous use.

What is 80 grit sandpaper used for?

It’s used for medium stock removal, smoothing rough edges, and preparing surfaces for finer finishing, exactly where this 80+ belt excels in metal prep.

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov