3M 7100025410 | 847 5 Gallon Brown Rubber And Gasket Adhesive

Priced per gallon. Total price = 5 gallon pail.

3M Nitrile High Performance Rubber and Gasket Adhesive 847H is a versatile, solvent based, high performance adhesive. It offers both good oil resistance and good heat resistance and is commonly used for bonding most rubber and gasket materials.

Versatile Rubber and Gasket Adhesive

3M Nitrile High Performance Rubber and Gasket Adhesive 847 is one of our most versatile solvent-based adhesives for rubber and gaskets. This adhesive bonds neoprene, reclaimed, nitrile rubber (BUNA), SBR and butyl rubbers to metal, wood and numerous plastics. It provides excellent heat and water resistance, performing in temperatures up to 300°F/148°C. 3M Nitrile High Performance Rubber and Gasket Adhesive 847 dries quickly and offers an open bonding range of up to 15 minutes, allowing time for positioning and adjustments without slowing down work processes.

Recommended Applications

• Gasket bonding
• Bonding fuel lines, fuel tanks and panels exposed to oil
• Attaching rubber to various substrates (should not be applied to EPDM or TPO)
• Patching rubber
• Leather repair

A High Performance Adhesive for Harsh Environments

In extreme conditions, where other adhesives are likely to fail, 3M Nitrile High Performance Rubber and Gasket Adhesive 847 has proven to be the go-to adhesive solution. This adhesive’s capability to form strong, flexible bonds quickly make it an optimal choice in harsh environments. Additionally, its medium viscosity allows for easy handling in brush or flow applications. As always, 3M continually strives to provide the greatest solutions for the continual refinement of projects in the workplace.

Applying Your Adhesive

Whether it is being sprayed, brushed or rolled on, the application of your 3M adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch and then proceed with the application of the additional coat.

Features:

• High performance adhesive intended to bond gaskets
• Adheres to nitrile rubber (BUNA), neoprene, SBR, butyl, leather, vinyl and various rubbers
• Excellent fuel, oil and water resistance
• Offers resistance to heat and moisture, performing in temperatures up to 300°F/148°C
• Optional heat cure increases bond strength
• This product has a higher viscosity than 847

Warning:

This product can expose you to materials and/or chemicals including arsenic, lead, and other materials and/or chemicals which are known to the state of California to cause cancer and/or reproductive harm.

For more information, visit www.P65Warnings.ca.gov